Separate names with a comma.
I was wondering about that. Randy set me up with 1 magnet, I assumed he set the logger for the correct setting but it may be off. I didn't do the...
I finally got a chance to look at the first logs after the install of my RPM logger. I plan to call Randy on Monday but figured I would ask this...
When I got a fresh set of heads we decided to get them put in so I really don't know what the per valve cost was. Plus that was 3-4 yrs ago. I'll...
Yes they sure take the heat better. I have pulled regular stainless valves out and had the heads almost just fall off, these come out in nice...
I have the Ferrea super alloy exhaust valves in my engine. They are about the same weight as a regular stainless valve so if you feel the heat...
Look at the spline in the ring gear. It will be either coarse or fine. I can't remember what the spline count is on the coarse ones but there is...
http://www.dragstuff.com/techarticles/reading-spark-plugs.html :D Corey
PM Sent Corey
I had an issue with my SMV a while back and Spud Miller gave me a quick check. Just take the generator off the drive remove all the wires and put...
I should probably give an update on this. I actually was able to grind the opening of the hat well enough to give me a pretty good transition. I...
That's going to be fun to get off again. The Right Stuff is great but...... :)
I would think a good set of Dykes rings would get you better results than gas porting IMO. Corey
When I first started running a blower I just basically changed manifolds and stuck a 14-71HHR Mert on my non blower engine and went racing. It...
I went with Mike's suggestion on my engine 60%-65% up top. I ran the engine this last weekend and after about 30min of testing, with cool down...
I switched from a pair of those shocks because the were going solid on me at the hit. I did some research and talked to a bunch of people and...
This the info I used when I was learning to use a Buzz box. http://www.goodvibesracing.com/buzz_box_tech.htm Corey
Actually the way Spud told me to do it, he said just pulling back on the rotor by hand would be plenty. Maybe that's my 2 deg issue. Can you...
I also use a Buzz box, I notice however that after being out of the game for 5 or so years my "feel" is off a bit. I buzzed the timing on my...
Ding :D Corey
The 2.050" your limited to about .800" lift, the 2.100" is .900" lift. I use the Nextek springs 2.100" installed and that gives you 350lbs/seat....
