Separate names with a comma.
Just use a timing light to look into the hole in the cap. Corey
If you go to Fuel Injection enterprises, Spud has a tune up calculator that includes blower output in all the various sizes. These are ball park...
The only way to truly set up a 4-link is to weight the car and find out your center of gravity. It has to be the true center on 2 planes not just...
You don't really mention if this is a new car but is your tank vent big enough? A friend of mine had inadequate venting on his fuel car (we...
Curious what you are building that you need a dome in your cc plate? Corey
Perfect, I've been reading the instructions and that's how I figured it worked, just wanted clarification . Thanks Corey
I am converting my old Supermag system over to a Promag 44. I am going to purchase a Power Grid for it, question I have is, I have a 4-7,5-3...
Just went through this same issue of what to get, a 44 or a 20. The biggest difference is the coil and control box. The 20 they are combined and...
Depending on the blower you may have to modify those nozzles bodies. I have a Littlefield and had to cut them off so they don't protrude through...
That's the biggest reason I don't want to just "buy" a used chassis. 1 You could be buying someone else's problems, and the car was built for the...
The biggest thing I discovered about building a scratch built chassis was all the different sizes of tube that goes into a chassis. A person can...
Project is going slow. very busy at work. I did at least narrow down a chassis kit. Looks like the Mark Williams kit is the best. Its the most...
Could you explain the theory behind "top fuel hoops" . I went to the tkm page and he shows what looks like o-rings in the heads. Is there another...
Not an expert on the converter drive Lenco's but is sounds like you don't have a neutral position on your transmission. Pretty easy conversion....
.003" to .0035" is minimum on the rods. I use GRP rods in my BBC and they say up to .006" . .002" and you are looking for trouble in my opinion....
Who tested it or what did you do to make it "test good" ? I am suspect of my Rimac also. Was waiting for an answer. Thanks Corey
No problem. Wasn't dumping on you just felt I needed to explain myself better. I always appreciate advise just needed to put the train back on the...
Seeing how I've built at least a dozen door cars (that people have actually paid me to do) that have been running for years with never so much as...
That was another thought I had. Just get a chassis partially built and finish the stuff that needs a driver to be sitting in the car.
Thanks for the info. I've been toying with the idea of a roller, I'm from Edmonton Alberta and there isn't a lot to choose from. I may start...
