Separate names with a comma.
Mike We run a whipple ontop of the motor that takes no load or power to turn. when I service the motor we do see some minimal damage to number...
Mike The motor has done this for a while, nothing has been changed component or set up wise. I honestly havent worried about it untill now as...
NO KNOBs or buttons on this one, have tried another local quality light and made no difference Clarky
Hello Mike We check the phasing of the mag at the start of each meet, then change over to the crank trigger. The timing/crank trigger is...
Thanks Randy, my next thing to try was a different points box. Crank hub is rcd and like brand new and torqued to 400ft/lb, we strip and...
set cam up at16th end float, however timing is taken from the crank trigger not via the mag. thanks
Thanks in advance Does anyone have a solution or reason why ignition timing retards from the original seting when the motor is reved up to...
I do smbs's motor supplied buy Snyder motorsports and we have belted a set of dog bones for around 40 passes regularily seen 10000+ over revs etc...
Can we will be the australian distributor if Garry Phillips alows us ha ha. I suck at putting photos on the net. goto Graham clarke on...
I am far from an expert, however any time our alcohol car idle incresses it is due to a lean condition. Maybe your new hat surface/nossle area is...
Hello I have a blown BBC supplied in pieces that I need to re assemble for a customer, it has a norris cam part number 450DMR. Does anyone have...
just watched the ESPN NHRA video link, amazing product, will be recommending it the owner of the funny car in our workshop in Australia
There is a group of guys over here in Western australia who build there own billet fords heads and everything else associated with killer ford...
Never really worked on a rootes to run really fast however based on what eli has asked leads me to ask a question. What is the point when...
we have just purchased a new race car that was originally fitted with a fontana based chev with the points box and coil mounts on the left side of...
Could this possibly be a lubrication issue. Not enough oil to cool the springs, so they are over heating and also could be the reason why push...
Where did the spring break? we run a similar spring in our hemi, They usually turn to junk after after 5 to 6 runs(service heads after every...
We use lucas oil stabiliser to, never burnt any parts up, good value easy and not to messy
I am certain that John Zappia has these on his new Psi doorslammer/pro mod engine here in Australia and has already run well into the 5.90s with...
I always hate those first start ups:eek: 4 flats is alot to change on a barrel valve, did you leak the barrel valve down before you started to...
