Separate names with a comma.
Thanks for info. Do you have a photo of this? This is what I was thinking the weak point would be, pulling out the head. Only planning on turning...
Hello all, first time in using these, going onto blown big block chevy, Brodix BB3 heads. Any advice or tips in using? Any tricks people...
Well we do have a callies crank here. It spun a centre main few years back. Been stored right since. Took to machine shop ground it 20 thou still...
Where is the Stealth on their website? The name certainly rings a bell.
Right, bit of a long winded post but I need to buy right... OHIO crankshafts, here there are just 'tweaked' SCAT and EAGLE forgings? This true?...
5mm is wrong. A tyre flexs and moves and wheel does not. Pass on them. Is the wheel out or the centre? Because if its the centre could buy new?
Thanks for all the replies guys! So down to 3 choices - any of these alright to use in our Lenco too? Reason I am asking is we just...
Need to know best oil grade to use. We use Lenco's usually to Glides new to us, car is approx 1850lbs altered, blown BBC, around 1750 hp 10...
First step for me is to fit a 990 pump
You will go slower if this is standard helix blower as you will just create heat not power. For hi helix, that's quite a jump, but go SMALLER...
Agree with Mike, think they need minimum of 250rpm to fire. Does it use a crank trigger? Is the blower fresh/tight? We use 48 volts/rcd...
Totally understand that, money is tight everywhere. If you machine it out just be sure to check it's strong enough, thinking about it if the Indy...
107 views and no replies.....OK my take on this is sell the BDS and buy an Indy or similar. The Indy doesn't have the centre piece in it but...
Happy to help. Great looking car and a cracking burnout! Also keep me updated with what it runs if ok at info@bennettracing.co.uk
I 'think' with heat as it alters the metal structure again But as I say, I think.
The way I read it, too much fuel in the hat. Reduce those .056"'s to say .050" try a pass then if needed reduce again to .048" then .046"...
What injector you using? Depends on size, also what blower? Generally set between 8 to 12 thou - make sure they are seated properly first.
Fuel will do this a little as above is richer at front to account for blower pushing more air to the front. Also remember BBC's have siamese...
Sorry I have not replied sooner. Glad it worked well for you too - it would of needed a little bit of tweaking as wouldn't of accounted for how...
Total hat is 0.01108 Sq In Total port is 0.01083 Sq In Little bit more up top wont hurt as lubes the blower. You also should add a pump...
