Separate names with a comma.
I've used ACD's stuff for years and normally never had an issue. What's not working right?
Silicone spray works great too. Just spray on and blow the rubber off or wipe it off and it doesn't smear.
Butch, I have run 25 with the big cap and currently running 23. Was ready to duck when first trying 25 but needed to get the car past some bad...
Control Cables are the best that I have seen. Several places sell them, Good Vibes, McKinney, Wizards and direct.
This is what I use. Not too fancy but will do pro jacks and 1/2" impact. Bought it at O'Riely's....
Milodon used to have you set theirs up with a piece of paper run through the gears for proper backlash. I just measured a sheet of paper and it...
That backlash seems pretty loose. US Gear recommends .006-.008. I always set to the high side for growth though and it seems to work pretty good.
I've tried it with the rev limiter in and off. I leave it off on the burnout now for the reasons above cited; you need to have some more power at...
Try these guys, that is where he went. Don't know if still there. Larry Jeffers Race Cars 5081 Bings Way House Springs, Mo 63051 Office...
A lot of places have these. Goodson machine shop supplies is one of them. http://www.goodson.com/Flex-Hones/
Don't know but it looks like a very expensive conventional A arm assembly. Very pretty though.
I use this one. Even though it is listed for 0-25LBS, I can read my rears and it is accurate and it also reads my front tires at 40LBS just fine....
Must be a Reactor.
Run 135 LBS with Red Loctite.
Bummer. RIP.
Thanks, just looking for the ring gear itself.
The alcohol cools the motor so as long as you don't run it too lean, you won't have cooling issues. In fact, if you are too rich, the engine will...
Looking for a CS1 fine spline 1.28% gear set and a 1.31% 80 tooth coarse spline ring gear and a 1.34% 74 tooth coarse spline ring gear. Please...
You must mean Trailer Toad. http://www.trailertoad.com/ Forgot about this one too. http://www.tufftow.com/
WTB 3.70 Big Pinion 9 1/2" Pro Gear. Please let me know if you have one you don't need.
