Separate names with a comma.
20 main sets available
Need some BAE 3 aluminum exhaust rockers. Also does any one know if sombody makes steel rockers for these 3 heads? Dale- 970-302-1232
Federal Mogul nitro and alcohol main &rod bearing sets and thrust sets for late model hemi and BB mopars. #142 M - main bearing set,(similar to...
If the the wrong rotation mag is installed will it even run? -Dale
Check the rotor phasing when cranking, to see if its at the same place that when running.Is there a timing adjust box on this?
Check for internal leaks. We had a aluminum bb chev that had a soft plug in the lifter galley by the distributor come out and had oil pressure...
No offense Mike, I respect your knowledge, and don't want to sound like a smart ass, and are also as guilty as the next guy, but maybe if someone...
See if the 10.7 discs will fit within the stands on the 10.5 flywheel with some clearance. I have found they will not. Dale
Usually a 16 nozzle system idles alot smoother than 8, so rolling into the start lights and staging might be easier with a converter trans. The...
I beg to differ Mike, a screw blower should have a lot of fuel through the hat nozzles to help seal and cool. I about ruined a screw blower by...
I noticed a few years ago,when the carbon hats first got popular and were the (trick of the month), Frank Manzo was running 5.40's with a standard...
I don't believe that is a (D) rotor blower. Looks like a (B) -Dale
Having it on the right side you have to contend with the blower belt and idler pulley. -Dale
I would warn against using a hi-helix blower like that Hampton with a BDS manifold on a BB Chev. Not very good distribution. Get a Indy or similar...
If this engine you are looking to buy has the cast (Rhino) block that Fontana made, run away , as most of these have or will crack in the mainweb...
I will never use a BDS manifold and a hi-helix blower again. It has bad distribution to the ports.It is made for standard helix.Close to 30...
Have a friend with a new century and smokes out of #1 cyl. on start. It clears up after 30 seconds or so. I figured it was out of the blower seal.
Doug, I have a complete CS-2 with a 1.63- 1st gear with 1.28s in both front and back.Also comes with a 1.31 and 1.34 ratio gears separate, with a...
Can the separate Lenco buttons be used to shift a B&J trans? Also can the plastic tubing hold up to the 400-450 lbs. of pressure to shift a B&J?...
