Separate names with a comma.
What rear gear do you have and what size slicks? Are you having a problem?
On the K type BVs we use on blower motors the idle check valve is also the return of fuel to the tank from the main jet.We normally you cap off...
Marc is correct. When you lower the tire pressure the tire cups so less footprint resulting in more tire slip/spin. Raising the tire pressure puts...
If it goes down the track straight then my recommendation is to leave it alone. Rear steer by offsetting the rear axle is done all the time in...
How does the car drive? Does it go straight down the track with the offset in it?
I have always asked the company that made the piston because it depends on the makeup of the pistons.
No advantage in performance just in safety. Most motors go right before the finish like so have always pulled out some timing to make sure no...
I would call TBS and talk to them about it.
Both the fuel and the timing will change the position of the blue line on the plug ground strap because it is the temperature in the chamber that...
If you have a trailer weather station connected to your Alky Pro It will transmit weather data and main jet size out onto the internet so you can...
No, they were both at the max allowed by the race rules.
A good friend of mine took his C PSI off the car and installed a Whipple and tested and raced but could not achieve the results he had with the...
That is hard to say without seeing this front opening. Is it open all the way back to the rotors? It has to be there for a reason. Can you email...
The air flow out of the bottom of a high helix comes out at a 45* angle so the more you can move it back the more even the flow is to all...
If you soup up the ProMag 44 you need to use the FIE coil because the MSD will fail with the extra power
By the time you buy new helo sprags, get the reverser case machined to take the newer sprags, and change all the sun gears, reverser shaft and...
That was the guy in Sweden that was going start up a Whipple shop but never did.
Not that I know. There was a person that bought all the rights to that Whipple blower and we thought he was going to start doing SFI Certs but...
Buy them all from Matt Moore at APT (619) 933-8636
You also cannot get a Whipple SFI Certified.
