Separate names with a comma.
7730
Call Crower at 619.690.7848. They can tell you.
You can install a second nozzle system that drips fuel into the hot cylinders. You don’t make a run at idle so idle temps are not that important....
The bigger diameter top pulley may make your belt last longer because it is less radius for it.
I don’t think the case can be saved. If they make oversized strips I have never seen them. If you adjusted the overdrive on the 14-71 so you had...
I believe that fixes the broken Quill shaft problem and not the belt breakage problem
You cannot run a screw blower without the quill shaft. It connects the front gears drive to the pulley flange.
The upper pulley is smaller so belt makes a sharper bend but the big thing is there is lots more friction and mass in the roots blower that in the...
Are you using a Two Step? If so then 3 runs
Well you have a pump that is designed to put out almost twice as much as you need. To try and dump the excess back to the tank will probably...
So with 32 lbs of boost are you figuring around 7.5 gpm. If it is around that then you have way too much pump and may need to underdrive it.
Are you using Alky Pro or Jetsize software. Also you never did tell us what engine and it’s cubic inches
The big thing on port flow is having them off at idle and on right at launch. You want the port check valve set at the lowest pressure that is...
How are you computing how many GPM you have? My figures are all backed up by flow meter data. What size motor is this?
My recommendation is to get the system flowed and be given a tuneup. The $800 spent on that is probably cheaper than paying to repair things and...
Why system pressure at 230 lbs at 8k? That is really high. I like to have 125-130 lbs at 8000. Are you measuring pressure at the pump? The normal...
Max what does your timing curve look like. Can you email me a picture of what you have been using to Mike.c@mindspring.com
Yes
Ok, I understand your circuit. The idle return controls you idle fuel pressure and at WOT your main bypass takes over because it is set at a...
Here is a DS rpm curve I have used many times with a 4.29 and a 34.5. See how it compares with yours. I would get no tire shake with it and great...
