Separate names with a comma.
A couple of things. First if the transmission fluid has friction modifiers in it then it can be too slick. I would say that 90% of the NHRA and...
I think that the air would flow ok. You would get a little turbulence but nothing serious
I think you accidentally worded that backwards. The problem is not as bad if the hat exit is smaller than the blower entrance. You are wasting...
It depends on how much horsepower you are making. If you make 2000 hp and increase by one pound the amount gained will be less than what is gained...
Jay70cuda, if you were up todate already then I can’t see a change so it must be in the computations. I will see what I can find out.
For those using AlkyPro there is an update available. Have your computer up on the internet then open AlkyPro then go to HELP at the top and click...
When you adjust the pressure are you in neutral and increasing the engine rpm to around 3000 so the needle settles down? What fluid are you using?...
I have a great picture of the spray bar on Adam Flamholc’s car while going down the track. It looks like a big cloud inside the hat just like the...
Ok but it is not my theory it is the way most roots blown Promods are set up and tuned.
You had better hope that the alcohol going into the cylinder is not sealing and cooling the piston rings and pistons because if you have that much...
But surely if what you are saying about shooting less fuel into the hat gives you more power then the spray bar in the hat would be a waste of...
No but it is being sucked into that hat and goes down and hits a 3” ledge which causes a tremendous amount of turbulence. Like putting out a speed...
Ok good. If you have any questions on the Alky Pro then feel free to ask me.
So did you give them a credit card. Be advised they are down in Australia so will not wake up for another three hours. so did you download the...
Try this http://www.insidetopalcohol.com/threads/mag-or-msd-10.5111/#post-20407
The probes should be no closer than 1.5” from the head exhaust face or probes will fail and they should be positioned before the first bend. I...
looking at the color on the plugs and they look safe so no detonation BUT the only thing that can do damage like that would be pre-detonation or...
How many times has this occurred? If more than once then was it on the same batch of plugs that you bought?
