Separate names with a comma.
thanks everyone. Also I am limited to an 871 at 10% OD so I have my answer
going to use a 4.250 crank and 4.500 bore I have a donovan BBC 11.2 deck block. I have a cubic inch limit of 575. I am wanting to stay at about...
296/500 crane
what type of vent do you have on the tank?
what type of ignition system do you have? What bearing are you using?
thanks for the info
what is good temp when heating oil to evaporate alcohol so it can be reused?
you can get that info from Lenco I know they make them
Wannabe you missed another set of injectors. I had a Kinsler 8-port before the blower.
Intake matching I have been there and done this with the intake. It does take alot of work but you can make the Indy intake work. It took many...
why not propane or nitrous?
sounds like we need to have a screwed over convention at their shop. I'll bring the sandwiches
sounds like another 1000 ways to die episode
he got me for a 1000 a few years ago. my motto is that revenge is best served cold
I think it depends on the type of racing you do, meaning distance and blower overdrive. I went from a pontiac 427 cast head to a set of billet...
I use the dual RCD. No issues for 7 years now. You just need a lot of room up front.
have you tried using the other side of the 6-shooter. I had this happen once. Switched to the other side and everything worked like is supposed to
measure the lengths you need and see if ARP has what you need.
It has been discussed here before. I think the rule of thumb is 10 psi per 1000 rpm.
The starters have different length cages on them.i would think that there is a fairly common length though. I would call rbs and get his opinion...
