Separate names with a comma.
Alot of guys throw water/alky mix at the intake charge to help keep egt's down and make some more power, the big time puller guys use alot of...
A thought or two. Another thing, you may or may not have thought of yet. Is that 4000psi the injector pop pressure? If so then your actual...
Diesel and nitro Im kind of a diesel guy myself, and have wondered what would happen with a small nitro % in diesel fuel, but like you said I...
R&R rods We run R&R rods too, bought my first set of aluminium rods from him and every set after that, never had a problem with any of them or...
This got to be quite an argument didnt it. Bottom line is, both steel and aluminium rods work, expesially in a lower HP motor like yours and mine...
Take a look at this video, its pretty funny. This is what most normal people hear when we start talking motors and drag racing......
I've got to agree with 23T on this one, 294* doesnt sound out of line, it may be a few degrees more than it really wants but that shouldnt make it...
Running water heads dry. If its a spread exh port head like a hemi or BBC dry shouldnt be a problem. We run a chrysler wedge motor and tried...
Finish them in the block. They should be finish honed IN the block, we've made our own sleeves before and just left some stock in them for the...
We pull our car around with a Kawi, Mule. It has a bed for tools and stuff and 4wd if we need it, its a little overkill but we use it for other...
Thats a bunch cheaper than what I'm used to paying for hoses, but if the seat angle is right in the fittings, good crimp, good hose, pressure...
Find a machine shop. A good machine shop shouldnt have any problems with putting a 1/4 key right over the woodruff like SoDak said, I would think...
A (blower) crank with only one 1/4 keyway? Probably so you can run a damper "or" a crank hub. What size is the woodruff and is it 180* from...
Blower motors tend to like the wider lobe seperations, 112-114 is pretty normal, in your case you shouldn't be too worried about making more...
I could be wrong here but I think the ETC rev limiters are pretty picky about your amp output, could be wrong though. We tried one with our...
Just going to throw my opinion out here. It doesnt look to me that you are that far off, one thing thats making it tricky is the big tire, a...
Converters Seems to me that the average stall speed is around 5000 rpm, a little more if your tires can take it or less if you have launch...
We run .0045-.005 on the mains and .004 on the rods (2.200 pin crank 4.5 stroke) and the thrust comes in around .015. Mopar wedge/powerglide,...
http://www.jegs.com/i/Stefs/861/6770...oductId=745617 This looks just like whats in our dry sump tank and it works great, never cooks the oil...
We use an old magnesium Crower blower hat, we just give it a shot of WD-40 or Kroil if its going to sit for awhile, same for our mag wheels.
