Separate names with a comma.
Im pretty sure the screws dont need as much to the hat, but I dont know any specifics.
We run a 572" Indy headed wedge with a std 8-71 and a 110 pump, its been to 170 mph in the 1/4 and we wiegh 3250lbs on a little 10.5w tire. I...
X2 We run a mopar wedge motor and tried running water heads dry, it didnt work well at all, I have a stack of head gaskets with the center...
We did it to our intake and it works good, we just put on some heavy lube like anti-sieze, ARP lube even STP to keep the O-ring in place while...
We use brad penn and we see a black streak coming from every cyl going to the pan, looks like ring and sleeve material to me. I've heard the...
Like Wannabe said, you dont want to pickup air...ever. Our tank holds 4.7 gallons but its tall, narrow and baffled so the fuel dont slosh...
100% agree on that one. You have to get rid of the water anyways. We use a cooking crock pot, I dont remember what temp it gets to, but it will...
We run a Kinsler fuel filter right after the pump, we clean it once a year and do find little bits of stuff sometimes. We run small port...
I dont know jack about 4 link cars, but I will tell you launching a heavy blower car can be a real pain. You need to video the launches so you...
Indy My experiance with Indy Cyl Heads has been, there machine work sucks and you have to fit the stuff yourself. If you call them you have about...
Yea, I tried a ETC limiter and it didnt work well for me, it started trying to limit WAY too early. I had the thing set on 9500-9900 rpm or...
First off, there is no way I would run a (used mag) unless I had it checked out by a mag guy, I dont know enough about them to trust myself inside...
Temps We have a temp gun kinda like whats in the picture, but they are really picky when it comes to the reflectivity of your target, trying to...
I dont remember the cost but I buy the better L-19 bolts too. Im sure the ARP2000 would do fine but I dont mind spending money on good bolts.
Ok I will throw my loose bolt story in here, we have problems with the rear pan bolts comming loose every pass, have not tried loctite or silicon....
I agree with Mike, I've seen coated bearings come out after a year still looking like new, the stuff really does work. But if you've been using...
Pistons Are you planning on buying blower pistons? The reason I ask is, we switched our 572" motor from NA injected to blown alky, used the...
I agree with everything on this post, 10:1 comp is a little low for big hp but the tuning window should be wide and easy to learn. Run it for a...
8mm gt There is nothing wrong with the 8mm setup, the really good poly chain or carbon GT belts are still fair priced, we bought two of them but...
I think adding nitro in the intake would be an even worse idea, it would surely detonate before the injector even fired... A diesel will (diesel)...
