Separate names with a comma.
Find a shop with a lathe, or even a guy with one in his garage, as long as he can make them all the same. Store bought washers are not flat and...
It shouldnt matter where you plumb in the high speed, it regulates pressure, thats it. If its set to open at say 130 psi it will limit your system...
Looks like I have the answer I was after, lower tire pressure. I'm not sure why I raised it in the first place Thanks guys.
I believe the tires are MT 33x10.5wx15, just short of 12" tread width. We had 9.0psi in them at the time.
I know the tire shake subject has been handed around quite alot, but I have to bring it up again. We made 3 decent attemps to launch our FED...
23T, im with you, I think we mixed the top-lube a little heavy. We are going to take it out again in a week or so to get the tune closer, I'll cut...
We made the first few hits with our blown SBC and everything went well but it seems to blow alot of black smoke and I'm not sure why. The only...
I use a pro tree brake and with the trans in reverse its actually still in nuetral until you push the trans brake button. When I back up from a...
We are going to try running them dry too, it worked fine when it was a stack injected motor but I have to say I'm a little worried about dry iron...
J.W transmissions has bolt on belhousings to fit mopar stuff but their attachment method is not great, they just use the pump bolts. Ried has a...
Has anyone seen anything special to look out for in tuning an iron headed blower motor? I wouldnt think there would be any but I thought I...
We are no means a max effort deal but we run a 4.5" X 4.5" 572" motor with an 8-71, I turn it 8200 most of the time. Only makes 12-15psi boost...
I would do a 4.30 or maybe even a 4.56, depending on how much those slicks grow and how fast you are going to be. Its gonna be violent launching...
Those pressures look low to me too, 70psi of oil pressure? I'd be looking for more like 170. After my first year of hurting bearings we were...
Im no big HP car, but I have a Bradco and it does exactly what he said it would. He also built me the converter over the weekend, then called me...
We are putting together a 6-71 382" small block chevy, looking at 1000-1200hp max, just wondering who's flexplate people use and like. We are...
We run a solid block and water heads. After fresh gaskets I retorque the morning after the first race day, usually ends up with 3 or 4 runs on it,...
Yea its a mag, an old Vertex turned up a little.
Ours is a 572" Chrysler wedge not a Hemi but that shouldnt make any differance. We use a 130 tooth ring gear and Chrysler starter and it works...
I put baffles in every one I've built, dont know if they really need them or not but it makes me feel better. I also put in some mesh type...
