Separate names with a comma.
I tried using 2 #12 vent hoses, it didnt work very well.
Yes, I call it top lube. I do it mainly for the pump but I think it helps keep corrosion out of the fuel system too. My bottle says 16oz treats...
I loctite the flexplate and converter bolts. I know two people who blame lost motors on bolts working loose, true or not who knows but I dont want...
This will be the fourth year having one behind my motor, havent broke one yet. I do read horror stories on here about them though, hope it dont...
More pump would let you run more line pressure and atomize your fuel better, something is off. We run a 110 with an 8-71@28% on a 572" motor,...
Im betting the intake or bottom of blower surface isnt parallel to the crank, the belt will try to climb to the high side.
We really dont know how fast it is yet, we are at 10% over on the 6-71 and it went 7.20 with all the cad left on the plugs, im sure it would run...
Port nozzles dont flow anything at idle anyway so they dont have anything to do with hunting/surge, but it is my personal opinion that port...
We have an SBC with a 6-71 and its really close to the vertex, there would be no way we could fit an 8 without moving the blower forward or moving...
I have a Kinsler right after the pump.
I learned on NGK's and thats all I've used in blown motors. They work good for our app and are easy to read.
The one in our funnel, I'm not sure what micron it is but its a fine SS screen, a hell of alot finer than the system 1 oil filter we use.
Industrial fuel We use industrial alcohol, have for years and will continue to do so. Always filter as it goes in and we run a good filter after...
Ding ding, I think there may be some decent points here.
I switched from Royal Purple 20-50 to 70wt Brad Penn, I'll just say that I wont be switching back, Brad Penn is a great oil. You may not have...
Our motors light easier on gas but the guy with the bottle needs to know what he's doing, with gas its easy to under or over do it.
Yes to the extra guide clearance, we dont run valve seals either, makes it smoke a bit at the hit but you need the extra lube IMO.
I could see keeping the radiator if you are making many passes in a short time but otherwise you dont need it. In our FED the trans needs more...
Those heads will work fine, they are small for a big HP motor but you are far from that. Good block choice but, a std cam hight block will...
Right or wrong I dont really know but its what we do. We use a 70micron system 1 filter between the pump and block (pressure side) and small...
