Separate names with a comma.
Actually, thinking about it, ours is a MK11, not a MK16. Same blade size but not a low profile injector... Will email you a picture or two...
When we ran with the Ally blades, we set the gap to as near as 0.006" as we could. We noticed that, after the motor had run for a minute or two,...
We also run the MK16 in England, as well as the DMPE Stealth plate. Also on a D but we're only at 70% over. In fact, we were the first to run it...
Is the car creeping when the brake is on. We've only hurt our transbrake clutch when the battery voltage was marginal and the clutch wasn't...
Timo Could easily be related to the spark plug issue you reported elsewhere ... a spark leak could be causing a cross fire. Martyn
Idle check The idle check pressure is right according to the info on Gorr's web site (http://gorrfuelsystems.com/uploads/online_manual.pdf). Do...
Good. Talk to you at Santa Pod. We have to connect up in a specific order to get a reliable connection.... Power up Racepak, wait until it...
Thank God that Microsoft don't make race motors.... If other USB devices work correctly it sounds like the USB-Serial connector itself is...
Can your laptop see any USB devices? In Device Manager, do you see the Universal Serial Bus Controllers at the bottom of the list? And if...
I think the driver I might be using is this one http://www.iogear.com/support/driver/GUC232A_win7_xp_vista_v1.0.075.zip Worth trying anyway......
I'm in Sweden at the moment and the race laptop is at home in the UK. I'll see what I can find when I get home this evening but as we're going...
Tom What brand is the adapter RacePak supplied? I didn't get mine from RacePak, but I did get the one Tim Anderson/Donny Cummings...
Go into Control Panel, then System and look at the Device Manager - if your adapter doesn't show on a COM port (under Ports(COM and LPT)), then...
Lean out Tom If you are still concerned about being over rich in stage, we have a (not the latest model) electronic lean out valve from Spud...
Good Vibrations ...
And I thought it was their customers who were expanding like crazy :)
Chase - Mark's email address is above. mark@flavellwelding.co.uk....
Mike Is that the old number for the shop in Seminole? He's now in Porter which would probably be a 918 area code ... Jim - I don't recognise...
In Europe, more often than not, we'd have to heat the fuel to get it to 50F in the first place :p
That's a relief. Thanks
