Separate names with a comma.
I changed mine from the 1 in input shaft to the 1.25 in and the parts needed are: input shaft and drum, pump, pump support. You have to machine...
Hi, I go through this list every time I put the bruno back on 1) Check that crank face and flex plate is clean and nice. 2) check flexplate run...
I have made one that is mounted permanently on the trailer. It is an old cooler unit from a crane with air/air cooler, pump, motor in one unit....
Hi, Jim is a good guy give him a try. You could also try JR at RBS superchargers, he helped me :-)
I have bought from these guys several times. http://www.verociousmotorsports.com/?search=weld%20fitting
Do you still have the valve covers? Can you email photos ? Thanks Moe
Hi, I have some spare ex and in.... PM if anyone needs some parts. BTW I am considering having some made, if we are more guys to pitch init...
I run the grid on the outside if the frame rail with the EM crank trigger plugged directly into the Grid harness. I would say that there is...
I would recommend Jon Salemi, very easy to work with and knowledgeable.
I had the same issue and I found some shims in different thickness to get the shaft end play down to something fairly tight. I cant remember what...
Have you guys tried to use a relay or solid state relay wired to the onboard starter button so when you are on the starter button the timing is...
I have a Meziere starter and I have had trouble with it, after talking to Jerry he told me that it should not be used longer than 3 sec. The...
Email sent to everybody who asked. The file is also attached here. Use it as you like and please get back to me if you have suggestions and...
I have one that I keep updating when I find something missing. :-) I will clean it up a bit and send it to you. Moe
I use 1 1/4 aluminum tubing with wiggins clamps. Works really good and it is easy to work with. Pricy but nice...
We have been running a street KB block for four years and it is doing great. The sleves are installed dry and are pretty tight to get in so you...
Start and mid plate help Hi, I have just completed my setup. I have a Meziere flex plate and Meziere chevy starter 10 pitch. I have drilled...
I have just been through this: I bought a 10 pitch 24 Volt meziere and it died really quickly. I started looking for parts in a starter catalog I...
I was thinking along the lines of a USB to Bluetooth adaptor. One on the Laptop and one on the Grid. I haven't tried yet. Have you guys...
Does anyone know when this will be available? I have heard some rumors but nothing more than that. Thanks Moe
