Separate names with a comma.
Try to take a look here: https://brykefasteners.com/
Do you still have the two CS1's for sale ?
Hi, I updated mine a couple of years ago, there is some drilling in the housing but nothing to difficult. Had the same problem as you since Im...
Will trade for 28 or 30 %
Bump and photos added
Both blocks are water blocks, long block 1 is a KB stage 3, long block 2 is a stage 6 (have to check to make sure) Email: mogens(at)ms-fab.com
526 CUI hemi Long block 1 KB Block 4.310 in bore, std deck, one window but really nice repair BAE Fathead 3 heads with victory titanium valves,...
like new shape 750 each
Here is my failed parts list: - points box (died with no warning) - Pickup in the base of the mag - The mag itself (it only fired one spark and...
Have two 526 cui both KB block, bryant crank, GRP rods, Ross or Arias pistons, morel lifters, manton push rods, victory tit valves, One is fresh...
No one have mentioned the drive shaft length and the drive shaft critical speed. I am not trying to promote Mark williams parts but they do have...
You prop. need atleast 16 qts depending on your oil pump setup
If you take the pan off you could out a pcs of wood 2x4 between the crank and block. I made a long handle that bolts on the lower pulley flange...
This is what we do before startup, Im not saying that it is perfect or anything like that 1) heat the oil 2) grease pushrods, lube valve train,...
Have you checked that you have rod bearing clearance where the journal radius turns up? You can see this if you look carefully with the rod...
try this online calculator, works pretty good. http://www.csgnetwork.com/compcalc.html
No one mention flaking of the coating in the stem/head transition area. We had two valves with 40 runs do that and that is a no go for me. Any...
Can you put the whole setup back on the engine, pull the plugs out of the shafts and prime the oil system with a drill ? That will tell you if...
Looking for some middle stands and one end.
When I had an misalignment issue the bruno pump bushing and plate behind the pump would show signed of a lot of heat. i think this is where the...
