Separate names with a comma.
Will I assume you have to run the Grimes plate also?
appears to be a factory psi plate,not sure about the intake. not sure if the wedge motor requires any changes. Seen the mod done to both wedge and...
Hello, Hello, is this thing on????? anybody?
What is the purpose of opening the rear of the intake top opening when running a psi screw? Seen a few widen and lenthen the rear "box" right...
yes its the same pump
What about crankshaft life using the two step? I heard it cuts the lifespan in half. Think it was Flanakin told me that
I didnt feel like figuring the correct ratio with high pressure alky, and variations w rpm and pump flows, so I used a el cheapo fuel pump from...
I doubt a tenth by hitting it in high gear, but it does work. about 10 or 12 years ago i dropped a tenth in eight mile on a 4.50 car with an...
That seems about right, they are pretty tough, gone a couple years before changing. I smear a coat of grease or some wd40 upon assembly to help...
yep holler if you need it
I hope you mean assembly lube in the post above:cool:
JR, RBS superchargers
I saw Ellis Vial had his C blower stuff for sale
That guy is giving you misleading info on that 3.81 and .90's
Dont try to run those 15x15 wheels on a 34.5-17-16 tire:D
11mm you can run up to 116 over with standard intake 54 botton 25 top, cut it down 250 and you can go 124 56/25
Its possible to get a piece of rubber from a hose about the only thing I see in the filter is a piece of lint occasionally
Only con I could see is that big filter hanging in front the motor and adding a coule more line connections.I use the SAE type that slides inside...
I had mine the same way,bottom of the B.V. Seen several guys plug them so now mines blocked off completely
Well you probably just cost me a set of wheels also! I didnt figure they were that much either
