Separate names with a comma.
When I went to a wet sump with the billet CN block I had To drill a bunch of holes in the valley, Think there was only 5 originally, about 5/8...
yeah like Bruce said only problem filtering back to the tank is slow scavenge, may have to drain the oil pan between rounds to put back to your...
50-50 gas alky mix and a healthy dose No way i'd ever spin a car over in the staging lanes with a throttle open asking for trouble in my opinion
I broke a crank in my 481x once, dont trust it. Took the block, all rods,pistons and beat the heads nad cam up too.
I think the larger gear was for the scavenge section on some of them
Many have the same issue with the P&P- RCD pump
I did up to 14 with a standard cap, never ran the big cap
If its that tight now I bet its gonna beat the teflon up pretty good when it does start
Dzus button in the leg? ouch!
I built my last one about 87", with a single 1.500 lower bar, twin 1.250 .058 uppers. had a wishbone that connected the lower bar to the lower 4...
you can locate bearings-seals thru a bearing supplier. Kinda tough to id them sometimes. I've had to go into several,pretty easy to work on....
simple green, and lots of it
Whats an airscoop? you talking about that lip deflector? If so you can ask Pizza Joe I gave him one to run on his car, he said it picked up some
Wizards warehouse got em I got a couple what you need?
ok, so I have a slightly damaged can, rolled the bottom lip a bit....like a speed bump caught it. can this be straightened with it cracking? Not...
After having to chisel,weld, cut and beg to remove some broke ones out the crank, I went to one in the flywheel
Take a 3/8 piece of tube, weld a plate to cover one end, take a caliper to measure depth and cut to length to the proper height and you'll have a...
You can double heli coil the exhaust and put a longer bolt. I bought mine from T&D. Told them what I was doing they knew the bolt for it. Jesel...
I filled some before, didnt help any, they still cracked. Pushed the chamber up.
I heard its difficult to repair them if filled
