Separate names with a comma.
Get pictures, the rotors are stamped on the psi's also just about any psi would work, the C,D, series are more prevelant. C's hard to come by as...
Probably had a 5.70 there if the chutes were not collecting air!
pretty scary to see his arm out the cage on those rollovers
6 3/4 on a promod 2300 lbs .946 60' beadlocks
For one, it didnt break! Not as much slop as a typical wishbone either. Broke the tabs off a Mcamis housing with a wishbone, the X link uses...
I ran the X link. liked it much better than a wishbone myself. Knew others who ran the welded bars, not sure of their experiences with them though
I used JB weld at the track once on a aluminum tank, was good for a couple years
Safest? dont run one and use the shift pods to dump the air Simplifies the plumbing also
I ran 250 and 115 on a 2380 lb car, after kinda what you did I went with Mcamis recomendation for a legal car and same thing had a 4x4 57' chevy look
and make sure that 2 step fuel bypass solenoid is not open all the time making it lean
Make sure the idiots at the fire suppresson place check pressures when filling, had one done last week, I knew I was in trouble when he said he...
Light is a help and if you run a Lahey box off it the display shows when activated
Like Mike said, Clutch to the floor, and you want the switch off from .006-.010 airgap from off the pedal More power we had to tighten it up
Exactly, except 4 dogs Spring holds the jaws together
I checked into them a while back, never heard of failures. I think they dont push selling them, make much more selling sprags
Same clown called me a while back about my complete operation, wasted about 2 hours of my time. I got his address and checked it on google earth....
Thanks was thinking it was as special made only part, JR at RBS had in stock though
Do they make a 40 tooth standard flange (not small psi) 8mm top pulley?
I hit the 9000 limiter on a psi one time, sheared all the lower blower bolts and the flywheel bolts at the same time! but it worked as intended,...
I'd shoot for 5"
