Separate names with a comma.
Looking for suggestions on an affordable weather station. Running KB/Veney/Littlefield/Lencodrive set up in a dragster. Running heads up...
24 Volt System (Beware) The 24 volt deal works great. Larry's battery's have worked well for us and we are wired just like every else that has...
Gasket Measurement Do you have any unused gaskets that you can measure for length? Are the ones you get square on the ends to match the intake...
Have Veney headed KB with oringed spacer plates between intake and heads. Where is the best place to get the end gaskets used on the intake?...
Fix a Flat Buddy of mine had similiar problem. Found out that one of his helpers put a can of fix - o - flat in one of the front tires. Talk...
Priming Gene is exactly right. Make sure that you pull the valve covers off when priming. Make sure that you get oil to all the rocker arms. Some...
Have you primed the pump from the filter side? Take the line off to the filter and fill it with oil. Sometimes you have to prime the pump to pick...
Tried the brake cleaner last night. Worked well. Is the MSD wire still the preferred set up? Still have concerns with the metal crimped end...
Late model with MSD 44. Is the MSD wire and molded assembly the selected wire and assembly to run with the MSD 44? How much is everyone...
Thanks Got mine working again last night. I have the Craftsman. My battery clamps were wider than the lugs that I was clamping on. It was the...
I have an inductive timing light that I have used for years on Vertex OXC. Seems to be giving me problems with my MSD 44. Recommendations?...
Ground Strap Could the ground problem cause issues with reading the plugs. I have a set of plugs from last 1/8 mile run that look really...
Gary Agan Gary Agan in Greenwood, Indiana. Don't have his number but Bruce Litton could help you. 317 293 7007 Brad Hiatt
Ground Strap Gene, What do you consider a good ground wire. I am having some problems with reading plugs and could have a ground problem....
Manton MSO-68 Noel, I have some of your MSO-68 on it right now. We had a small sample that we got at the PRI show. Smells alot like gear...
Looking for ideas on what to run for lubricant in my push rod cups. See alot of guys putting special lube in the intake push rod cups when...
Simple This is clean and simple but could hurt the mag if you loose a blower.
Thacker's run! Thacker's 3/4 track wheelie was the greatest drag racing pass that I have ever witnessed in my life. This came after...
Double Mine You could not appreciate it without seeing it.... Dietzel and Sage 1993 6.235 234.99 with twin motored Pontiacs TAD legal....
Mag Support May have what you need. Straight up Enderle mag drive/MSD 44 but comes off the idler bracket. A must see. Call Gerardot. 260...
