Separate names with a comma.
Remember boost is resistance to flow. What heads you using? Improved flow equals lower boost given the rest the same, the way I understand. So,...
Yes. I forget if we used the aluminum before switching, was 5 years ago, but obviously must have, or else why switch. I remember it was a "big"...
We had the SM4 and SM+ with the RPM unit on blown and turbo BBC. We use a four magnet hub. Measure RPM, fuel pressure, boost, turbo back...
Did you flush out he oiling system before reassembling when you had the motor apart after the first calamity? Are these the same rods the second...
So, is this the same coil that is used on the SuperMag+ or is it the same configuration/case with different insides? JW
Sorry, but I didn't notice you were going blown. My SR's are on a twin turbo setup so I use the carb base. Don't know if either makes a blower...
If it has the same port openings as an SR20, I think you are limited. At least when we bought our 20's a couple of years ago, there were only one...
Somewhere on here this was discussed before, I think, and the speed rating was mentioned. Prolonged road speeds of over 70 mph can cause issues...
I have found that the gauge of the wire is the most important element. We start with 24 v direct to the solenoid of the hi-torque starters...
Hi, looking to buy either an Edelbrock 2897 or 2918 or a Dart 41125000 intake manifold. Something used fits my budget. Anybody have anything?...
Call Lowell at New Century....he might be able to help. JW
In need of a hi-torque starter for a KB Olds block (with the hump) or just the mounting block. The Powermaster part number is 9417. Anybody have...
Ours were Bowtie blocks, sleeved all 8 once, filled it to the freeze plug hole--no issues. Also did a truck block at #2--no issues 4.40 bore. JW
Used Milodon on one 540 with 14-71 and Keith Black on other 540 with 14-71. Also each had Pioneer mag drives and Hilborn fuel pumps. Many...
540 BBC; 14-71 HH at 45%; Brodix BB-2X worked; Crane 1.7's with Brodix girdle; Comp roller lifters; Trend pushrods; Lunati 800-ish cam--tractor...
In search of a set of heads studs for a KB Olds block. They must be 1/2-13 stepped down to 7/16-20. Lengths are special" to fit Brodix SR-20. I...
540 KB Olds with Brodix SR-20 heads and 10.5 compression; twin 91 turbochargers on alcohol. On board 12 volt mini starter with two 1000CCA...
Advanced Chassis in Antwerp, OH can make what you want if they haven't already done one. JW
Hi! shoot me an email and I will give you specs we used for our 540's we used on the NTPA minis we ran when they were on superchargers (since...
