Separate names with a comma.
Marty, How do you identify whether you have a small or large sprag tranny, any measurements? Thanks for any info.
If I had quoted his post, it would have showed the original numbers on bore X stroke that he listed. If you'll notice, he edited his post when...
What Dave said, assuming the crank was balanced for fuel pistons, you're probably going to have to add some Mallory metal, fuel pistons are about...
WOW!! Had no idea they would take that much.....probably explains why mine still have a slight bulge. Thanks for the heads up. :)
They went to the 4.00 tire several years ago, I've been running it since late 2008, unless there is a newer tire since then, still bulges a little...
What is the problem exactly, piston-counterweight clearance or something else? The only combo I can come up with to get a 521 is 4.350" bore x...
If you're using the stock starter position in a FC/Altered chassis, the upright at the motorplate is your biggest issue, width of most chassis...
Wags, Just out of curiosity, where are you taking your readings, at the pit or at water level? Back when I was running boats, (shortly after the...
It's a reverse band, supposedly from a T-400 but one that I got had FoMoCo cast in it.
Larry, This came up on another thread a little while back, sounds like you may have too much top lube, like you said. Someone had put a bottle...
Running 5.90's in a light dragster is one thing, but water just sucks up so much torque to get a boat out on top on the launch, does a small...
Chad, Hate to hear it, wish I could think of anything good to say about TCI, but what you describe sounds pretty typical for most of their...
If you're already having a 501 built, stick with that, you won't find a better ride IMHO.
Chad, I don't know if the tranny should be in gear or not, I always set mine with the Lenco in neutral, if the Bruno had a load on it, or the...
Chad, Pressure needs to be minimum of 150 pounds at idle, according to Bruno, Sr. There is a plug next to the guage, with an allen head set screw...
An option, if you don't want or can't change from the Chevy bell pattern, S & W makes a 1/2" adapter plate that is 2' X 2" square, with crank...
Bruno Sr. told me straight F-type, said that synthetics were too slippery to hold the trans-brake drum. I've run F and tractor hydraulic oil both...
The # for the nitro filter (50-70wt screen) is 512571. The number for the standard (finer screen) is 512561. Those are the numbers for the...
Dayum, I've got a hero right here in my hometown and I didn't know it.......I'm excited... :D :D :D
I was thinking the grape scented mix was fuel lube, if thats the case sounds like a double mix. One bottle of Power Plus is good for a drum.
