Separate names with a comma.
You wouldn't pump oil to a remote filter with anything less than a -12 under pressure. I can't imagine oil doing much more than dribbling through...
Guys, Keep in mind there can be as much as 2 quarts under each valve cover when running and won't drain down until after engine is shut off,...
This is for the CS-3 but I imagine the principle is the same. Didn't Lenco at one time make an overdrive unit, where 1st gear was 1 to 1? Could...
Mike, How do you determine what is big/small shaft units,(CS2) and I assume we're talking internal shafts, not input/output. Do you have or know...
I'm with Mark on this one, 10.5 to 11.5 is a good starting point if this is new to you, the tuning window is much, much wider and gives you a good...
I had the same problem, had to mount them one on top of the other next to dry sump tank, behind fuel tank. Went through pretty rigorous tech...
I'm thinking a 1.35 2-speed with a pedal clutch is going to be taking a pretty big chunk out of it on the hit. It would probably work with a...
I second that one ^^^^ :)
You're good to go if you can run the big pan with that many quarts. F/C pans are different issue as they are usually low profile and can only...
All of the heat buildup has to be in the convertor, there really isn't anything else in the Bruno to build up heat, unless the band is too tight...
Not sure what the cutoff would be, but I went to the middle weight (15lb) Braille battery as I already had a couple of them, they're rated at 575...
Sounds like your poppet solenoid isn't adjusted. With air off, loosen the big hex nut, apply 12v and screw the solenoid in until the teflon...
Sorry Will, didn't know that.
Greg, PM me your email and I'll send some pics tonight, not saying that I want to sell them right now but want to at least stay in touch with you,...
Greg, I don't know who modified it or how it came into being but about 12 years ago I bought a 1/2" tall deck short block and some busted Stage...
Hard to say without knowing what you consider a safe rod/stroke ratio is. With a 1.35ish compression height and a 6.68 rod, you could squeeze a...
Blower speed, timing and getting compression down gives you a lot wider tuning window for hitting the index. I'm running about 10.75, with a...
Can't tell you too much, but I did see remnants of one of his motors at Music City Rod Shop in Nashville in the early '80's. Bill and Bob Amos,RIP...
Eric, If you've got a 6-inch dragster style pan that can hold 12-14 quarts, you won't have any problem with a wet-sump, especially since a wedge...
Take this for what it's worth, I was talking with one of the Flagle brothers (Russ, I think) at Monster Mopar back in 2003 about a blown low-deck...
