Separate names with a comma.
i am thinking about building another altered, and would like to know what everyone is running as far as crank center line goes. our car is just...
Josh.... 16 is what we have always ran......i think you will be just fine with that. Darren
Mike.... that car will run in the 3's....don't care what anyone says. look at the gains you made when you added fuel....it still needs more. wait...
we like the brad penn......hard to beat for our deal. we are doubling our oil life over other non-synthetic oils. we use a straight...
Don.... i run 2 10' simpson chutes on my car...i would run the equivalent on yours......brand is up to you. Darren
i was just wondering if i missed something.....why the low car count this weekend? i noticed a lot of the regulars weren't there. Darren
Don....i just use a 30 amp toggle switch, use one with wide contacts....shouldn't have a problem. put it somewhere that you can't accidentally...
Larry.... that is Mark Sheehans old car.....ran in Top Comp for years. i think it is still the quickest blown alky altered in history. i think...
Dextron III
http://www.gerardot.com/ call Don....great guy to deal with Darren
well, i would at least get a 20, a 44 would be the ultimate. i don't think you would be happy with the 12 later on. we run a 20 with 40 pounds of...
Bob.... set it as close to zero as you can get Darren
Redline Shockproof is the best we have ever used......great stuff. we run a little more, like Richard says.
my gauge sits on .025 on the left side of the dial....then goes around once and back to 0......mine always ends up at .701 hope this helps Darren
build a single wheel 8 footer. call S&W and buy the piece that holds the wheel and the threaded T that threads into the adjuster tube and build...
i have ran into that before, and i just faced the pads off in my lathe.....pilot as well. you can do it in a mill also. take it to your machine...
here's the way i did it....... set block with pan installed on something to raise it off the floor high enough to install the motorplate. cut a...
Corey, I am by no means an expert, and everyone will have a different answer to any clutch question you ask .... my feelings are that you have...
here is what i use....works great Darren [IMG]
I would run a 3 disc 10" in that car. we run a Crower.....which are pretty easy to work on, and are readily available on the used market. you...
