Separate names with a comma.
how you go about taking the fuel away while on the 2 step ? and how much you take away ? we have never taken fuel away before, havent had any...
Bill, ......we are not hitters by no means but we use the air throttle to control the boost at the hit. We set the air throttle at 7000 and the 2...
Anyone use these lifters (CAM FX) we bought a new set and they will not hold 165lbs oil pressure for more then 35 seconds then falls off to about...
if its like a cs2 you dont need a new bearing . put white builders grease on the bearings in the inner race and istall the hub back in the case...
we pull with the blower gaurd and it works fine WELL till we lifted the blower had to resort to the frame tie downs . its just harder to get to...
IS THIS A LENCO DRIVE ? 2 spd and no the oil will not transfer to the reverser it takes 1/2 qt itself . Doc
we run 20 qts in our 481x and have to drain the oil pan after 5 runs back to the tank .:cool:....Doc
check your rear end mounting bolts we had the same prob found over time the bolts came loose letting the rearend move under a load and broke the...
get with your local truck tarp guy same tarps 1/2 the price and you can get any size you need ....Doc:cool:
our lencodrive is big shaft and has a neutral .....:D,,,,Doc:cool:
call mick snyder,219-987-2923 they have what you are asking for we use one with our lencodrive 250 one side 125 other......Doc..
lol what a duff....:D thanks mike
Thanks mike, ordered some today .... by the way whats the diff in the 1/8 inch or 1/4 inch probes ??... Doc:cool:
IM in need of a few new egt probes. Is there anywhere to buy them witout going through computec or racepack?? thanks Doc:cool:
It is nice to see Nhra learning how to bring in the crowds for a div race, all they had to do is look at ADRL, and the crowds they bring in, Seems...
strange can get you a 10 inch gear and there ultra case will fit a 10 inch.Doc:cool:
yes 2055 :cool:
we are trying to tell you you need to stop the rear tires from creeping and that will stop the rolling prob. ...IF the rear tires dont creep the...
we use a line lock on the rear wheels on our promod . we had a prob with the trans break not holding over 4500 and we installed the line lock all...
same for us one button on the wheel ,......Doc:cool:
