Separate names with a comma.
Don't know about that oil , he may be right , but all of my parts look like new after a lot of runs. I think I'll stick with what I've been...
I ran FED for a few years, found out that it did not like the usual big tire that a RED runs. Ended up with a light weight Hoosier on a 14 in wide...
I have a 12 in tall carbon hat with 10.5 in bottom opening for a roots blower for sale. Has 5 1/4 in blades. In great shape. Come bare with shaft...
I know you probably already know this....... But I'll share it anyway. I've always replaced one quart of oil with a quart of Lucas heavy duty oil...
Dunn
Hey....... Easy on the Stroud bashing. I use them, and I use the ones he recommends, larger than I would have bought on my own. But why should I...
Like Will said get the 44 amp mag. The fact that is you'll never regret getting the best part for your dollar. And in this case the 44 in the...
You are using bolts that have shoulder that engages the pulley and threaded only where is screws into the crank hub? If the threads are seeing...
Well then , the Convertor will serve you better in that kind of racing. Once you figure out your deal, almost no Maintance.
Just like Jay said..... If you are gonna change , go ahead and put a Convertor in it. A hundred times easier to deal with at the track. Sounds...
Check all of the parameters in the grid. Individual cylinder timing should be off, check firing order , max timing .... Everything. Then fire it...
You did use a wire reinforced hose to connect the hard line to the bottom of the fuel pump? It will suck a plain hose shut.
Weighs more but I use -3 pre made NOS high pressure braided lines and AN type fittings on the B and J buttons.
Just went through the same thing, talked to Mike S. at B and J , he said that it is somewhat normal to have an accumulation of oil build up in the...
The kid probably drinks to help forget the past with his former owner.
Looking for a tall ( approx 14in ) dragster carbon hat.
Re- check rotor phasing. Make sure it is at your timing , say 26 deg, pointed should be just ahead of no one spark plug on cap. Sometimes , on my...
What is a better choice if you are on a budget?
Convo pros would be fine if they have the knurled option, only thing is they are so damn ugly. Lol. I have a set of weld TAD legal liner wheels...
I cracked my mag intake last race of last year. Had an underwater certified welder ce out and weld it up. Next pass... Cracked beside his weld....
