Separate names with a comma.
Thanks.... but I've already bought a new set of Sanders wheels
Looking For a set of 16x16 DBL wheels. 5 on 5 bolt space with 4" backspace What do you have. ?
Anyone have any data on what a 30 to 50 pound weight loss will do to the et of a sub 4 second ( 1/8 mile ) car ?
I have an aluminum bonnifonti quick drive Bellhousing , fits MBR /chevy though.
That 1.98 low gear is a lot. Like Will said, try a 4.30 and I'd try a taller first gear. Say a 1.50 something or so. Leave at a higher rpm also.
My buddy Mike Kopchick at RAGE fuel systems made a set of one piece collars that have a split and two fasteners. Machines to the same id as the...
Some people call them ( fire rings ). I have them in my heads. Instead of a wire they are actually rings machined out of stainless bar that are...
Heard of guys using pantyhose over top of funnel.
call me at 843-921-8653 before 6:00 pm est
nearly new SFI 20 Simpson jacket and pants. Black. Size medium Build date 6-16 SFI label on each is 2016 dated. Only worn a couple of times, looks...
My tuner , Mike Kopchick, tells me that if I move the probe to the front of the intake the temp will go up approx 8 to 10 deg I plan on moving...
Rear of intake.
Well I've run a new SSI F4 and a new Hammer blower both at over 30% and still keep the temps below 120deg. Spray bar works
DMPE is right... A lot of boost at a very high temp will definitely hurt performance. A good blower should be less than 115 deg or so. Depending...
A flowed fuel system ensures that all of the components are matches and tuned. A stock bypass pill usually does not actually flow what the number...
Rage is about to introduce there own electronic fuel injection system for blower cars. It will be a true split system but will have a common...
It may not may not be better. The deal with Janis deal is , if you don't already have an injector hat you can buy his deal complete already in a...
Damn...... You guys can over think a wet dream Hahaha ! , if you want to gain some easy power get Rage to put one in your existing hat or buy one...
Ran same strips and coating for a whole season for the last two years. No problems with either. One was a SSI blower and one was a Hammer...
This is what what the inside of a hat with a spray bar looks like...... If it shows up clear.
