Separate names with a comma.
You can really set the pressure were you want. By putting larger nozzles your pressure will drop & fuel wont atomize as well. Whats the go with...
Sodak, check ,check, check & check
I have heard that plenty of guys are running them on turbo deals with 30 plus # drag application but dont know anyone running in the blown circuit...
We currently are running Blown alcohol circuit boat, BBC powered, & are in the process of rebuilding a fresh engine. It would be nice to go away...
Yeah, me too. Sure would be good too get the pics on the site.
Harry, no response from SoDak yet? Just curious to find out myself.
Fastfiat, with the deal you are running & boost, I cant see any advantage going to the Hellfire. Just stick with the Moly.
john barnes, I think that the head bolt positions on a BB/C wont allow the figure 8 style O ringing. The grooves get too close to the either the...
Very good observation Jim, but the pins in use are 9310 with .220 wall
Thanks guys for the input. Spoke to the guys at CP & they said that the cut they make along the side of the pin can be left thicker which would...
Curious to find out if we have a better option on pistons as we are using CP at the moment on 1471 @ 31%, 28 lbs, 8000rpm max. 10.6:1 comp,BBC...
Oiling problem will start to discolor the bearing, but IMO if the top bearing in the rod clips on the crank & falls off the rod,you have pounded...
I feel that if the combustion pressure gets past your "O" ring seal around the bore, then nothing is going to help you.
You need to check all 3 journals with a dial indicator, & not just the center. The crank can be bent on one side, depending were the damage was.
I had an issue with the JW starting to crack on the tig welds. Has anyone else had this issue?
We use the 110 pump on 517 BBC with a 14-71 turning at 38% & 28 lbs at 8000rpm in a circuit boat with no issues. If you run a 990, will you run a...
Just curious but is there an update? Are thing much closer to completion or have we been side tracked? Whats happening with the rev limiter?
Outlaw, as mentioned about the indy manifold, can you tell us the stagger in the ports & what your running in the hat. Just curious as the...
X2. If it was OK before, then it must be way rich now, otherwise, something else is happening.
Just curious, but does anyone do a tall style hat so the incoming air is being straightened to go straight down onto the blower to suit a roots...
