Separate names with a comma.
Your caliper mounts could be flexing. Other end same symptoms the axles could be moving around. Caliper mounts that are flexing is...
Yes again to .006 rod clearance & .004 main clearance being the correct numbers. In fact Right On the perfect numbers.
Go here for simple complete instructions on doing it right. http://www.lakewoodindustries.com/pdf/BELLHOUSINGALIGN.pdf Go here for...
Competition Cams .904 diameter body Super Roller Lifters Part # 892L-1 offset Left .210 Part # 892R-1 offset Right .210 Part # 892C-1...
Offset pushrod cup lifters are an option. Check the position of the rocker tip on the valve. You can always scoot the rocker over with shims....
Had same problem with dash mounted oil pressure gauge. It just seemed like it took a long time to rise up. Car also has a low oil pressure...
One of the original reasons for the liners was for safety, in case you blew out a rear tire. That is why they were called Safety Liners. The...
Best thing to do with that type stuff would be to put it on eBay. Everytime I have early Hemi parts I no longer need that is what I do with...
Just super glue the sealing ring to the filter on disposable canister style filters or high oil pressure will push the ring out. Use a billet...
Gee Will I know the answer to this one. I bet you can guess now.
If you have the proper dog bone looking side seals you do not need silicone. Just lube them when you put them in. Silicone makes it hard to...
On the Autometer part be sure the 1/2 RPM test button is not facing forward or put tape around it. I bought a new one to replace our old one and...
The front cam bearing is not set up for a set screw. Use a little Loctite stud and bearing mount to help hold it in place. Down side is it will...
Yes I personally do sell overstock, old inventory and used parts along with other unusal and strange items on eBay and all proceeds are for extra...
All you have to understand to deal with the EPA is that they are a totally FOR PROFIT group under the guise of being for the environment. This...
Mac's silicone spray from NAPA stores part # 8300 Leaves no messy film to clean up, preserves the o-rings and keeps them from sticking. This...
If memory serves me I posted on this subject before. Did a steel crankshaft and was very happy with the results. I do not see much purpose in...
I too think this thread is just plain worn out and should be deleted. Although the person that signed on 'hopefully' pretending to be him was...
Those are pretty cool. Seems like 'information' to me and not a sales pitch at all.
The Genuine Keith Black cam bearing sets have properly re-located oil holes in them. Using others that just fit the hole can be disastrous to...
