Separate names with a comma.
I do not get why someone would want a Two day event on Friday and Saturday when most spectators are going to come on Saturday and Sunday? TAD and...
I have always voted for 16 car fields. No one wants to spend thousands of dollars 'of their own money' to go to a race and only run in...
No one re-certifys belts without re-webbing them per SFI rules. "four extra months added to the punch date" was probally an error as that is...
A track bump analyzer could have helped when I was at Tucson many years ago and was set up for the right lane for qualifying then got forced into...
I also us an alarm system battery. Nothing to leak out. Light weight. Is really 12 volts like all the stuff on the car is supposed to use....
We used the Cryogenic treatment on a crankshaft. It reduced the flexing and wind up making the #2 and #4 main bearings life double. Not too...
Get some cheep insurance. Quality bolts hold your car together and will save your life. Buy a Ring Gear bolt kit from ARP #250-3002 $29.72 or...
Blown car use two keys on the crank hub. One is fine on the crank gear. Put the key in the stock location then install the crank gear. Degree...
I use the System 1 pump and a Moroso Accumulator on my wet sump Hemi. I plumbed it into the #8 port on the pump and it works great that way....
You can in fact adjust how hard/fast the shifts are by playing with the pressure. Lower pod pressure gives softer shifts so it dose not break...
Putting a full size tube in a drag tire that size is not a good idea. Works great for Sand Cars though. Screw the tire to the rim. Reason is...
I agree trimming the thin tips is always a great way to prevent problems. Many springs come that way already. Like the Erson Valve Springs I use.
I use the Goodridge lines and fittings that Will sells and it is GREAT STUFF !!! Buying it from Will helps support this site and his racing...
I hate to see guys suffering for this type of stuff just because they do not know that - Full Race Supply has it ALL in stock and ships world...
The 7AL may be a clue. Distributors with centrifugal advance and blowers do not mix and will in fact cause idle hunting. Lock out the advance...
If the car is self starting bad electric current flow will pit the bearings. Running a Mag without good grounding to the heads will do it too....
Save parts by dropping the timing to 26 and work your way up not the other way around. Reading the spark plugs to get the fuel right. The fuel...
We need to get back to racing cars instead of racing pocket books. Yes the electronic gadgets are taking over racing and this is not a good...
New Redline Liquid Assembly Lube comes in squeeze bottles instead of the screw top tub of paste that would make it convenient for the purpose....
To much timing will cause it to nose over in high gear.
