Separate names with a comma.
The distribution block should be pressurized when the engine's running, so there shouldn't be any vacuum at the primer nozzle to pull fuel through...
yes to both. Drill and tap the plug on the distribution block, and use the E-7133 check valve from Good Vibrations.
I put a sawed off nozzle body into the top of the hat distribution block so that it pumps through the hat nozzles when I hit the prime button....
and there's a lot of really fast passes on 10.5's as well... I think what it really comes down to car setup and tuning - a good tuner can make a...
They're mounted on bead locks. Thanks Mike. I figured with the bigger footprint it might help on questionable tracks over the 34.5.
I just picked up a door car roller. It has Hoosier 17-36-16 tires on it. Prior experience has been with the 34.5's. Combination will be roots...
Jay - when you say 3600 @ 1.0, what rear ratio are you figuring? Wouldn't that change the desired DS speed? As would tire diameter, but I...
Not sure on the 1.72 CH... By my calculations: 10.725 deck - 0.020 clearance - 7.086 rod - 2 (half stroke) = 1.619 Johnson's site lists a...
email with info and pics sent few days ago.
If you're starting with nothing, I'd definitely suggest getting an entire package. That way you'll have all the little pieces that you don't...
Here's what my Racepak Hoffer flowmeter has on it: On the main housing between the AN connectors: Model HO5/8X5/8 1.76-16-CB-1M-MS-X...
I think you'll find that one of the biggest reasons for towing is to save your oil. A blower engine runs pretty fat at idle and if you drive it...
So the less expensive diaphragm pumps will live...
Will, Would it be possible to provide a link to which pump you're using? When you do a search for hot oil gear pump you get such a variety, and...
Scott's building a transfer case Mike, this isn't a blower belt :) We built a chain drive case years ago that we used in our Mod 4x4 pulling...
Thanks for your input guys!
I'm putting together a fuel headed alcohol combo to run the local heads-up, Q8 stuff. (1/8mile 2600lb door car, std deck KB, 4.5x4.310, 176...
in other words - it's so fat that it can't hurt itself and even with air change it's still fat :)
We used a Rev in a pro-mod style car for a season. I found it comfortable and easy to get on/off in the car, although it was helpful to have a...
Have you actually deployed the chutes with only the check valves (with the air disconnected)? The launch cylinders need to fill with air to push...
