Separate names with a comma.
I'm also in the process of figuring this out. I'm figuring on using an MSD shift controller to control the solenoids, but I haven't gotten...
thanks Bruce!
Has anyone moved between Fuel heads and Fat heads on a blown alcohol setup and has a ballpark difference for timing and fuel? I've got a safe...
Depending on which HH blower and which manifold you have, the front discharge is ahead of the manifold opening unless you move it back, so in that...
Summit pro-shop has 60Plus in the 5 gal pail for $103.
I don't believe that they made any HiHelix (120 degree rotors) blowers with standard openings. I thought they all had deltas because the 120...
My fuel head rockers are all from Stage V - rollers everywhere and look to be decent pieces.
so Manley's essentially admitting that their locks won't hold up at the RPMs we typically run a Hemi at? Nice to know after I just put a set of...
When it "moves up the stem" is the groove on the stem getting beat out, or is the ring on the keeper moving - essentially shearing off?
I've got a KB billet wet sump that's in great shape that I want to sell or trade for a dry sump.
I'm thinking of just laying a small o-ring in the hole in the gasket. May have to drill the gasket out a bit, but the o-ring isn't going to go...
Is there any baffles between the in and out? If not it seems like with both the in and out lines about an inch off the bottom that anything...
Mike - the timers are still started from the release of the TB, but only when the WOT is active. The WOT switch is between the TB and the Grid so...
Where are you dimpling the gasket? Just around the return holes?
I think the converter slippage is a bigger effective gear change than that. Wouldn't a 5% converter slippage be like having a 1.05 gear in the...
Sent you and email and text on the Racepak v300sd system.
x2 on the Awesome cleaner - got mine at Dollar General.
That's the 12v version Mike. The battery powered version is 8991, and it's around $235.
I think the math assumes that the car is glued to the track and will perform the same before and after the weight change. I had an Anglia with a...
Did you put the correct K factor into the rpm program when you set it back up on the new laptop?
