Separate names with a comma.
Same tach converter to a standard autometer tach no probs.
Msd or autometer tach converter. Then run what ever you want from the tach signal wire. That's what we used before going to promag.
The ect guy is very helpful. Stands behind his products 100% If you have a issue don't hesitate to call him.
Been down this road too. Just go buy a 44 they are cheap now for a good used. All the electric stuff is a little untrustworthy.
I have the same element in a fram filter. But mine is similar to a system one. With canister and cage.
Thanks for the input there the cheapest too
Which dry pan is everyone using on funny cars Olson Moroso Williams. Which gives better clearance. Do the carbon buckets fit these all...
That was what I had planed to do. But I have seen other people just making a long bent handle that comes straight off the shaft. Is this...
Hi I am running a 2 speed Lenco. In a funny car. The standard reverser Handel that bolts to the rear of the reverser is not going to do...
Thanks for all the responses. Brandon hit it on the head. Took the value body apart and it was a little dirty. Clean it down now transbrake...
I had the volt meter on the post of the trans. Has 11.5volt It's clicking but I'm not quite sure if it's as loud as it used to be. It just...
Sorry I meant engage. Has been working. But on the weekend did two laps and on the 2nd could select reverse after burn out but once back could...
Lencodrive transbrake will not engage. Therefore I can't change forward to reverse ect. Car still drives hard and fast if started in...
Screens With a hemi we don't pull oil from the valve covers The p and p pumps only pull from the pan.
Ok thanks but is there a kit available From strange. I saw a dragster repair kit but don't no about the funnycar spindles
How do you take the slack out of the king pin On strange funny car spindles. Do they make a kit for the funny car type. I no they do a...
Psi Shuts motor down. Better than a rod out. Ect works like a soft touch. Took 2 units until we got it right. They worked but I never...
I have used the ect limiters. The guy that makes them is a real gentleman. He makes all type of electrical stuff for racing. And he stands...
How do you check the gear oil level on the k11 My old mooneyham had a level hole. Half way up the gears On the front cover. But this...
Looking at a set a of mickey Ts with a stiff side wall. Does this help with a converter car.
