Separate names with a comma.
we have been running solid pro filer heads for the last three years with no problems. 526 8:71 20 lbs boost.
push rods We are using Manton 7/16 to 3/8 tapered push rod .120 wall on a 526 BBC . We are using a 26 degree Profiler head , Had to do some...
We have been using Ross for the last five years . Good support and very friendly.
r&r rods As far as i know Mike Janis is selling them and using them.
our port nozzel poppett is set at 10 lbs.
set back we run ours at three inches back . you still need to even up the cyls. with your port nozzels.
Crane .904's no problems.
we use red RTV. no gaskets. works for us.
hre been a member for three years. best money i've spent.
bbc cu. in. we are using a low deck-4.560 bore -4.00 stroke- 522 cu.in. .
blower belt have you turned the motor over with the belt on?the idler should line up the belt. then see where the belt is riding on the pulleys....
trailer station we have been using an altronic's for the last few years. bought it through crew chief. also using his soft ware. don higgins is...
blower belt about one inch of movment on the opposite side of the idler pulley. this must be done cold. as the engine warms up the growth of the...
zommies bought mine from performance motorsports $250.00
primer i bought mine from ron's.we still start it on the bottle cold . works fine after that.
hre been hre for two years been very good for us. guys are very helpful and curtous.
