Separate names with a comma.
I resemble that remark!! Lol. Sounds like a great motor. Not in the budget for a few years.
Air throttle and two step Right now I have air throttle and two step. The blades are a hair less than 1/4 inch open and the motor is barely up...
I am old school and on the limit of spending with the wife Still fat, the plugs haven't even started burning cad. I don't have any real...
Finally Some Good News (and a question about blower belt life) We went to the track yesterday, things went well. 26 degrees of timing all in at...
My Browell housing is drilled for both Hemi and Chevy, I have a starter pocket on passenger side not in stock location. Sending it to the...
Comparing the 11mm and 8mm PS belts on a screw, does the 11mm reduce HP output due to parasitic losses? If so, any ideas on how much? TIA
Today's word "Amazingly Close" After a very responsive machinist asked advice from Hemi experts that do Hemis all day and all night at the...
I do have the 5/16 ball. I'll be back on the motor tomorrow and will let everybody know what simulating a longer pushrod does. Thanks for all...
I have 4 to 5 threads showing. This motor went together before the tubes were replaced. The interference is on the intake side. The pushrods were...
The tube is .725 OD and .625 ID pressed into the Veney head and exposed to the intake port, how thin can I grind for pushrod clearance?
After all the repairs to the heads, block and stuff after my latest blow-up (self induced, owned it), I am assembling the motor and checking...
Gone!!! Thanks ITA!!!!
To the top Thanks for looking....
Thanks Thanks Trevor, and everyone for your replies. Currently sorting out options and waiting, waiting, waiting on machine shop that promised...
Do you know where I can score some spare fuel stuff? I was working on a deal with a great guy on that visits here and was going to get into the...
I have heard everything from 1.8 to 1.9 or 2.0. If I could get spare heads exactly like I have I would probably stay with this program.
Guys and gals, I am looking for to buy a junk (or borrow) spare Brad 5, 6, &, 8 or NRE head and stands/rockers to mock up on my TFX 1.8 lifter...
What kind of airflow/power difference would I see between these two heads? 4.310 bore 4.5 stroke on both? Thanks guys and gals
Cherry set of Brooks 88 Connecting rods for a Hemi. 7.126 length, 1.094 pin, 2.375 (2.5) rod. They have been assembled in an engine, turned out to...
Many thanks Thanks Mike, Also have a Rage pump coming, too many scary stories with the Enderle 1380.
