Separate names with a comma.
This issue just arose. As the RPM increases my oil pressure drops. I hadn't noticed this until this past weekend. But it follows a recent oil...
Had to "Resize" them on the Bridgeport. I talked with Milodon and they said .319-.320 is to print. There wa no way .320 was going in the pimp...
Purchased two new drives and both came with Over size Hex (one at .324 and the other .320) kinda tough to fit into a .312 broach...
Greg got me up and running... Altronics seems to have made some data output changes and the correct path needed to be discovered.
I found that app but I am still the 14 day trial so once I go all in then I will up load it. Thanks
Nope...all USB connections. USB A on the computer end and USB B on the Weather station end
I agree 100% but never seen this happen prior nor anyone I know. Ordered two replacements so we will see how it goes.
[ATTACH]
[ATTACH] [IMG] The pump spins fine, My experience is when the pump jams/fails it twist off the Hex because the engine keeps running (with 0 oil...
Mike Thanks for the link . I don't have a real serial port on the computer it only (4) USB ports. The Altronics (raceworks) software operates...
BTW this is a two piece (Mag Base /Pump drive) design not the "Enderle" Mag base pump drive one piece shaft design
I've seen the 5/16 hex on a HEMI pump drive break more than once but for the first time for me I broke the Mag drive slot (not the mag base) in...
Mike The Driver is FTDI, as far as loading the driver the adapter was installed from previous set up. no specific driver was provided from either...
Hello all Is there anyone out there running Alkypro and Altronics Performeaire PC based weather station. Just acquired both and cant get Alkypro...
I used a Power master (aprt # 604) pinion to convert both the Powermaster MOPAR mount and a stock MOPAR mini starter to work with a GM flexplate
Sounds like too much pressure to the Converter... Whats Bruno say?
As long as you can create an access to the Flywheel/Flexplate and generate the proper offset for the two gears you can place the opening...
[ATTACH] [ATTACH] Not a KB Olds but I mounted my starter to the Mid plate on the pass side on a KB Hemi. Used a Mopar style starter to mock it up,...
Any machine shop (or any one that owns a Bridgeport) should be able to do it but you need to give them the dimensions to work with. Width and...
thanks
