Separate names with a comma.
Whats are you using for a timing light? Looking for a self powered unit. I have been using my tried and true light that requires a battery hook up...
Very helpful thread... I just switched to a larger pump and sizer at the end of the season. My advisor gave me the initial set up and suggested...
How Loose are the sleeves at the bottom? Another option that will allow the removal of the sleeves would be to chrome the controlling diameter of...
Did MGP rods get out of the Blown Alc rod buiness? just went to their web page and they only list Chevy, Ford and import rods.
Update, Seems I have resolved my issue (for now)...the crank is parallel horizontaly to the manifold blower mounting surface. The mounting...
I have an support coming as well... thanks
Thanks Graham
Thanks Mike. My idler only has a washer under the head of the through bolt. The bearings are pressed on to an arbor that sits against the bracket....
relationships all look good (crank to manifold, blower base to snout) no loose or broken fasteners, Do Pulleys wear out?? The bottom pulley...
Thanks Jeff, I didnt mention that I had checked the blower studs and snout . They were tight/good. We will see about the intake tonight.
Hello All Recently I have broken two belts back-to-back. First one we figured was lean condition issue since we had just made some fuel...
As long as everything is OK , usually at the shed prior to an event, then once or twice during. Mind you I'm only bracket/testing and conditions...
Yes, the distance from rocker to cup was also correct to allow the oil to get to the cup/ ball interface. You don't need a lot of oil to keep it...
FWIW...I had a pushrod/adjuster issue with a set of Veny heads with stage V rockers. The cup or adjuster would blue/tear up in only a few runs. I...
thanks, taken care of...was hoping for an east cost connection but Good Vibrations has me covered
Anyone know where I can get a fitting like this 10AN to -8 ORB
What do we think about Lucas 70 wgt oil? Anyone using it ?
We went thru the system and found a fitting or two that could have been tighter (not loose but got half a flat tighter). 80 psi at idle and now...
Thanks Yep.. tonight we're going thru the oiling system and hose condition is on the list. When we had the oil pump drive issue (broke the mag...
I have yet to look but thanks for the bullet point on the check list.
