Separate names with a comma.
sold it
Time Make I didn't receive a email send again and I'll send pictures
need pricing
I have one send me a email and I'll send pictures hydrotherapy715@yahoo.com
So if I modify the valve body so I can use a transmission cooler when in the pits that should be the presure side that chargers the converter ,and...
I do measure the presure out of the cooler lines ,and it runs about 60psi on launch then in high gear it's about 40psi
Neil Chance billet nsx ,it has a billet steel no ring gear .LSC flywheel
Brad block ,lencodrive thrust bearing wearing on back side ,sent crank to marine crankshaft had repaired, checked flywheel run out ,dial indicated...
bought a set Thanks
1.094 pins
Looking for a new set of hemi rods 7.185 or close with a .094 pin that some one changed comb,MPG,GRP ,CP OR R&G hydrotherapy715@yahoo.com
[IMG]
Tighten belt like a bow string ,why I know I left the belt not as tight as it should be. and they were 14mm belts ,I wracked the throttle and did...
Belt wasn't tight enough ,when you wacked the throttle without a load the rotor weight is much higher on a PSI and the belt will climb over the...
Thanks
Lou ,Dave Sharp I'll take both generators. hydrotherapy715@yahoo.com tell me how to pay you
Billet alum. P&P/RCD wet/dry sump Hemi oil pump oil filter bypass manifold. This manifold is designed to remove the oil filter off the engine...
Instead of ruining the steel line that connect the two ports there using RCD adapter that takes up less room two an fittings for oil pressure for...
with all the bolts out put the blower belt on and turn the blower it should break loose