Separate names with a comma.
If it's an exhaust valve it should be fine - the nitro guys always back the motor down at the end of a run to straighten the exhaust valves - they...
Flatout Group (Flatout Gaskets) has water jet cutting available for just about any material...Call Mark at Flatout and he can fix ya up....He has...
I have 29 and 30 tooth 14MM GT mag flat back pulleys for sale or trade for 30 tooth GT (mag or alum) with .320 offset.....Scott Gaulter...
Got my MSD timing light from Robert.....very bright (Robert Reehl and the light)
Sold - thanks ITA
When I ran a BBC I tried to wrap the diaper around the outside of starter and also behind it....got frustrated as the frame clearance was just too...
Nice used MSD Pro-Mag 44 part# 8140 (CCW Hemi Rotation) along with EM-8 channel timer, MSD #8158 Six Shooter and #8168 Retard Controller. I...
The Nitro Madness team got a new DMP Awning last spring and we proudly show it off at every event! Excellent product....
Not sure where I came up with it but 135 with red locktite just feels right with the torque wrench so that's the torque number that we have always...
That rules out the filter insert.....
Just a thought - System One makes several filter inserts with different screen densities for thin or thick oil weights - make sure you have the...
Made a few adjustments last night and have better results.... The first mistake I made was not replacing the pressure bleeder top with the top...
The spacers are both on the 3/4 side so that the 7/8 side gets the most pressure - if I move the pushrod to the center (between spacers) then the...
Having an issue with our brake system....using CNC side by side master cylinder....here are the specs first.. M/W 4 piston calipers in the rear...
We use the O-ring on blower top between the blower and restraint plate....then a screen style gasket glued with silicone to the top of the...
I bought a duct for the bell housing from Browell and attached it to a Black & Decker leaf blower with a flexible hose....I think it's 3" or 4"...
Mark, We are bleeding brakes properly....I spoke with CNC today about this....with their dual side by side master cylinder you must use their...
Maybe I should re-phrase my question...if I have a 2 lb. valve in the rear now....is there any advantage to going to a 4 lb. rear valve as far as...
Just curious about using a 2 lb. or 4 lb. residual valve for rear disk brakes on an Altered chassis...have 2 lb. front and rear now and I am...
Since these cars are never really finished and you will be adding small tabs, changing the locations of several items, etc...I suggest a single...
