Separate names with a comma.
I get my policies from Chris Norris too...Off course and storage as well as liability... Here is how my policies work: Owner's & Sponsors...
I know you are probably getting responses on this thread from clutch and converter racers...but since I assume you have a converter the 1.69 x...
Flowedge Fuel Systems in Knoxville, Iowa - Britt & Todd Micetich Phone Britt - 515-556-1803 Phone Todd - 641-891-4082
I think the Pro-Mod guys should chime in here too....but I will give ya info on my decision.....125" altered chassis.... Ran a System One dry sump...
I like the Meziere - very high quality part.....stay away from Reactor....I broke several of those....
Sold pending ability to create new user code....
Since we went the nitro route a few years ago I don't use this program anymore....Version1.73V Jetsize program....Pretty sure Ryan Davenport can...
Ya might look at oil volume too....I had a KB Olds a few years back that did not return oil to the pan very well....there was a restriction at the...
I agree with Will - but I wish that RCD would publish a correct torque on their splined hub long bolt.....we have been torquing to around 250...
I will defer to an engine builder for a more technical answer....but the biggest, baddest, beefiest rod seems like the best choice....having one...
For those times the beadlocks should be fine - when you start dipping into the low 4's/mid 6's then the liners will help with tire shake -...
Tommy Johnson, Sr. has the GPS tracker along with his trailer alarm systems - pretty sure you can buy the GPS separately....
You can buy the crimp tool - rubber lines - straight & 90 degree fittings from Good Vibrations or RBS Superchargers - good investment if you plan...
We spray our rotors with Prism through the screen occasionally...but hit it real well when the hat or blower is off the manifold (spray the rotors...
I agree that more oil is better....when I was researching running a wet sump system (didn't wanna hafta drain oil from the pan and the dry sump...
We use air launchers and put a one way check valve in the air line just in case of an air pressure failure - it's a small inline valve that keeps...
I have had the Cole-Hersey relays (sold by MSD) fail due to shake and vibration....and they fail to ground position if the spring breaks which...
I don't have an answer for the dragsters.....but in the Funny Car and Altered chassis cars the alcohol guys seem to all run liner type wheels and...
Wax & Grease remover (paint pre-cleaner) works well....I get it from Keystone Body Supply and wipe down the entire body between races...then wax...
Not sure about rolling the upper bearing in & out....it does not see much abuse... One neat trick is to use a small bottle jack with the...
