Separate names with a comma.
I put a one way check valve in the air line just ahead of the chute launcher to ensure that if we ever broke an airline the chute air cylinders...
I recently developed a neat way to keep all of your racing receipts, specifications, trailer maintenance, etc. using these tabs in a 3 ring...
https://www.amazon.com/3M-7162-Full-Facepiece-Spray-Respirator/dp/B0002STR86/ref=sr_1_2?ie=UTF8&qid=1491917488&sr=8-2&keywords=3m+full+mask
I have had cams that the valve lash measured slightly different depending on where on the base circle you positioned the cam....and always...
Seems like it was for the shaft....but call PSI anyway....not that complicated after i spoke with them...
Hey Don....seems like my Classic 38" with a Chevy Crew Cab Dually was around 21,500 lbs complete....included the truck, trailer along with tools...
I have a Dunn single mag drive with PSI shaft upgrade....and I had the same issue a few years ago (wanted to install new bronze lower gear)...So I...
Hoping Will won't pull this response....but it's free - just sign up at www.nitromadness.com Just 2 issues per year....Spring & Fall
You might wanna check out the tire shake article in the Spring 2017 issue of Nitro Madness Magazine....by Randy McMahon....he explains the...
Well guys...I'm just about ready to recycle this wheel....cannot find anyone that wants to straighten it...any last thoughts before it gets melted...
That is one argument for the ice chest coolers....they will bring the temp down below ambient temp that day...
I would like to take credit for this design, but the original idea was from Bruce & Jared Micetich - Advance Transmission in Knoxville, Iowa -...
Steve - we talked last night about the welding process on repaired blocks... When I had a block repaired years ago, Jay Roach (J & S East Valley...
Thanks - we have an AWR shop just a few miles from here....I will stop and see 'em...
Radar had a light rub with the wall at Havana last weekend....scratched up the outer beadlock ring on a M/T rear wheel...sanded and...
Sold - thanks ITA
I have 2 RCD 6.375" diameter degree rings - both are for center flange pulley (offset)...one new = $100.00 and one used = $50.00 (outside degree...
It's not the same type of car.....but just a reminder to check your drive shaft for straightness if you have a solid drive line (F/C -...
When I bought my Jig for 125" F/C style chassis the builder said that they mis-aligned the engine and rear end on purpose....they had run sensors...
Pretty sure my current car is about 10.5" front of crank to ground with 34.5" tires....motor is tipped down in front......seems fairly easy to...
