Separate names with a comma.
A I agree. A good billet bae from obsolete to state of the art is not a tremendous amount of power.but the price difference is huge. Ideally...
washer yes I have the washer to fit the big radius of the NAS bolt. They have a nice fit and shank without threads but the tensile strength is...
Does anybody have a good lower pulley bolt sourced for a 3/8-24 BAE screw application? I've been using the NAS 12pt RCD bolt torqued to 45 ft lbs...
Fixed It works thanks!
Sync The grid item I'm looking at is tach output sync. Could that effect the gray wire output to make the data logger happy?
Timing The grid timing recording is fine. The leahy tdc timing indicator on the data logger is the problem. It worked fine with 8973. Leahy...
We have a grid with a lahey tdc indicator box sending the timing data to a rpm data logger.Does anybody know what settings affect the output...
Spring 10-4 I'm doing this for the next race. I've been close before on some springs but not consistent throughout the engine.
I was thinking the same thing. I have a lathe I just need a valve to copy.thanks for the idea.
Springs 126g intake and 96g exhaust. I know they are heavier than most current stuff but it seems to wear the exhaust just as much as the...
if it wasn't for 10000 rpm id say you were running a chevy!!!
springs T&D has pressure oiling everywhere so I think it flows on the spring pretty good.Std BAE restrictors in the block. Most outlaw screw cars...
I run a typical bae 5 c rotor outlaw combo with a bullet cam that I specified should be easy on parts. Shift at 9300 and no wide open two step. I...
Tires I've heard of the 36 really helping a car with problems but a pro tuner was not involved. I'm pretty sure Frankie and Pesz like the 36....
Rocker The standard bae oil system through the block is fine with good rocker gear. All the adjusters need to be pressure fed to avoid lubing...
Ngk 5671 reads a little hotter. I think the 6061 exists mostly because of monkey see from fuel cars.
11mm The belt ends up too long so you have a huge top and bottom pulley. The crank triggers and everything on the bottom are a pain also...
Belt 1705 -11mm will work fine on the tall deck. You will need a custom bottom pulley. Reehl sells them for around 275.00. It's not simple but...
Bbc I would look hard at the oil system. No room for error on a Chevy esp wet sump.
