Separate names with a comma.
i have two small pieces tubing 1 on each side without out looking i would say about 3/8 to 7/16 tubing comes out about 3"from the frame rail and...
i have heard that also so are the ones that look like copper! copper are steel
it doesnt seem out of line if it leaves ok a friend was having trouble getting his down track so i had him knock 8* and ramp it back in in about...
i mis spoke mine are copper also not steel
i have only seen the steel ones i have never had a problem either
beadlocks are liners i have run a very similar car wheel speed is very imporant if the wheel speed is not up and you pull the below its power...
dale yes you can lightly sand and buff them and bring the shine back as for the ones that are the dull finish i use wd-40 and i have cleared...
sounds like your under powered at that point if it shaking the tires it under powered
a spare blower belt batterys for the timing light and a spare battery for the tach your12v supply i keep spare nuts for the valve covers and oil...
there a lot of different ways my 10.7 set up at 702 at the hat my 10" sets up at 785 not sure for the reasoning but it was set up that way when i...
yes you can change one without changing the other bas is what you have on the starting line when you let the clutch out the counter weight is...
2000grt is very very gentle
both of mine are grounded to the same place on the frame as the coil
i like to leave with a 120lbs thats what i was told to leave with when i started running the hemi are bad things could happen i dont know if for...
just make it simple ground each head to the frame all you need 2 wires your done
well my hoosier hook very good cant complain
i know where one of those trucks is setting looks pretty good from what i can tell what parts are you looking for
there you go brandon can help you his car haul a$$
you have a big pump for a small block so you have to get rid of the fuel some how and a loop is and the main is where to take fuel away mine has...
whats it doing rick
