Separate names with a comma.
i love this site i learned some thing from this thread i didnt know you guys are tough thanks good luck brian
egts 1300 seems high to me when i ran ihra a/fc and had the race pack pro one if i remember right egts were 1050 but that was a venny head motor...
70% is way to low i have never seen one that low on a blower motor when the bv is to low the motor stumble when you go to crack the throttle and...
after you check every thing and its still to lean put a 100 in the main that will fatten it up for sure then lean it back 10 at a time i would...
i run the brad fuel heads and run pretty good im pretty close to bruces my blades are set @12* 44amp msd 30*timing good air waterman fuel pump...
when i do mine it is just simple a line tank to tank hook them up open the small then open the mother bottle you can hear the small one fill up...
get you a mother bottle of co2 or nitregen from your local welding supply warehouse there about 3 feet tall make you a line to go between the two...
100 i think
do you have adjustable spindles that will allow you to lower the front end a little
i heard that
its a kinda a long story but my chevy motor didnt like it at all man that green oil will stay on parts for a long time (lol)
do your self a favor get the green oil brad penn 50wt are 70wt you cant go wrong the valvoline will break down i used it once in a pinch never agian
sounds like its oiling to me with 70wt its a good idea to warm the pump and pan up if its real cold are go to 50wt me personally i would warm up...
warm the oil up are you tring to prime it with a drill with 70wt at 54 degrees thats hard to do it was still cold here several weeks ago i was...
when i put my first hemi together several years ago 340lbs at the seat was the norm now i went to the 400lbs at the seat to me its a little...
weight in front of spindle (wheel center line) will help as more weight on the nose thats where mine is 11 gallon fuel tank should help keeping...
i dont think you need that cubic inch if its a blown motor if you need more hp add more boost are a better blower if im thinking right its a lot...
did you get the bus going cool looking rides the fab work amazing
sleeve of top rod bearings and sleeve of bottom main bearings i check mine after three runs till you get a handle on if you leaning on it keep an...
i run the ngk b-9es seems to work fine for what i run
