Separate names with a comma.
Guys, That is exactly why T/C should not be legal , Once a PERFECT run is factored in as a BASELINE to the T/C unit and then IF the next run...
Maybe the Mickey Ferro Team might be a chance ???
Guys/ Gals, You know that WHITE SMOKE/ FUMES that comes from the back of the jet when they do the start line deal , that is UNBURNT DIESEL, it...
An 80A - 1 @14 % over should flow 7.77 galls @ 8000 @ 100 lbs back pressure if the pump is any good, 6.81 with NO overdrive Doug
srxspec, you have a PM!
I thought I saw a strong looking one on Mike Kosky's car ?? a while ago, any comments Mike on where it came from ,or do you sell them. Or can post...
Hi, Which is the strongest PSI belt guard (with starter bracket) available, that fits and doesn't need modification to the starter cage or...
If leaving the valves set is going to hurt the springs(I assume that is what you meant ) they must be junk springs, Excess RPM and heat is what...
Hi, I have a dual mag drive, and want to blank off the other hole where the 2nd mag was. Who makes the blanking plate for this? Thanks, Doug
BTW, The oil pan will fit as well
Hey Joe, Yes the BAE block is the same as a KB /426 OEM. Just make sure your geardrive is the raised cam version as ALL BAE blocks are raised...
Hi, Does anyone have a simple hookup diagram for a Electrimotion Command Module? I can't find one on their website (like they do for their...
If you have a filter on the oil return to the tank , best you check to make sure it is flowing in the correct direction.
Thanks for that Will. How has the fiberglass body held up after running 261mph? Does anyone else out there know what weight would be considered...
I have an older style funny car body and am looking to upgrade to a new one. What weight would be considered a light complete alcohol body...
Hi, Who re-calibrates CSR gauges that have been put onto the high pressure side by mistake? Is it a big deal to fix? Thanks, Doug
Iron Mike That would be from Racepac
In the manifold, under the discharge port of the blower.
Hi, Is there a reason that increasing the hat nozzle area significantly doesn't decrease the manifold temp at all? I am running a PSI "D"...
The cranking speed needs to be at least 250 rpm. It'll be hard to achieve this even with 24V. I presume its an on-board starter, if it is, you'll...
