Separate names with a comma.
When i switched from a steel block, alu headed BBC to a TFX hemi i only lost about 10 lbs total.
The Heads are each grounded to the same point as the mag. with propper sized wire Regarding rpm. I am fairly sure it didn't go crazy, as i have...
@ Mike if it went lean as you suggest wouldn't i be able to see brunt pistons, valves etc? The other pistons crowns look like new Regard...
They are indeed old plugs. They are all one run TF plugs that we used for warmup, setting idle etc in the pits. About the main, yes i thought...
@ Mike Yes the order in which you described it is how it went. After the first test run we changed the oil, started it on the stands in the...
The rods where new pistons used but with low runs don't remember how many will have to ask Yes "Mosten" is indeed a single lane dragstip, when...
We run 70 wt nitro oil. It always made alot of pressure on all startups and, just checking the pressure before startup with the starter it...
it is the back side of the bearing that you are seeing in the picture. I havn't taken the rest of the pistons out of the block yet, we just...
Hello I have a TD camaro with a TFX hemi with AJPE stage 2 fuel heads, msd 44 promag, SSI standard helix 14/71, powerglide car. My engine...
There is no fuel check, no money, no sponsors, no payouts etc etc .. well you get the picture, in the class i race in, it is purely for fun. So...
Is there any real world difference between industrial methanol and racing specific methanol? The industrial stuff I have access to is 99.7 clean.
How much oil goes in the front and rear gear housings on a SSI 14/71 blower?
Ahh now i get it, thank you for clearing that up. I misunderstood you, I took it as there was no power to be gained above 9000 blower rpm for...
Mike I was reading your post regarding od limits on hh and standard helix roots. As far as i know fuel cars run standard helix blowers yet...
Thank you Pete
grauen@gmail.com
@ pete Which flexplate are you using and what transmission? Also do you have any pictures? I checked the mcaims starter it seems to come...
starter issues I know this is an old thread, I have some issues in regard to this. I have a door car with full tube chassi and front struts. Mine...
4.6 bore My last engine was a bowtie chevy with a 4.6 bore, it broke a piston pin. When i toke the engine apart afterwards (block was destroyed)...
it depends on your current transmission housing. I just went thru this issue on my car. My transmission has the ATI supercase,it is really...
