Separate names with a comma.
NHRA Nitrous cars can run the 36's the blower and turbo cars have to run the 34.5
I ran a 10 for years in my experience the box works or its dead the coils to go away slow sometimes change coil,coil wires go bad the 10 is almost...
I have the the Duel PAC 1360 springs they started at 525 @2.100 80 plus runs later intakes were at 475 ext were at 450 (steel valve) its a 481 x...
lol 86 runs shifting @9000 same valve springs 475 on seat new 450 now
100 lbs of static is 100 lbs from idle to 10,000 rpm 10 grams of counter can be 150 lbs @ 5000 rpm to 800 lbs @10,000
Whats your shift RPM that has a huge impact how much CWT you will end up with. I have had the best luck with low base and letting the CWT do the...
i know the ''new'' best converter merry go round can be very expensive but you cant argue with the awesome performance that the converter cars...
You need lots of drain backs in the valley of the block
I would run .0045 to .005 60 wt oil 100 psi plus oil pressure !!!!!! .003 is way to tight for a boosted engine i ran a iron dart block in a...
I have a long tab welded to the front part of the chassis with multiple 10-32 tapped holes all of my head,coil,points box,crank trigger shielding...
I had a set of the Crower needleless lifters for our 481X we hurt a roller after one race. Talked to the crower lifter wizard and he recommended...
There part # 65985K13 $ 13.89 phone # 630 833 0300
Mc master carr supply has them they are 13 bucks you have to crimp the terminals on them
I use the same stone but on a wet grinder. How are you guys keeping floaters flat when they are dry ground. I used a bull grinder once rough...
i would use min .003 AND BEG AND BORROW a real bore gage !!!!!! you can buy a cheap one and micrometers for under 200 bucks
alky attacks epoxy and makes is detach from what ever surface you attach it to
A blown hemi HAS to vent if you block off valve covers its going to push out somewhere else that you won't like !!!!!!
Open your clearances to .004 .0045 rods and mains 20-50 or straight 50 oil have 70 psi idle 100 or so wot run at least 10-12 qt brad penn or...
BE careful on buying tubing CP or pure Ti it has very little strength compared to Ti-6Al-4V alloy some times buy small drops is a crap shoot
Running the steel T&D rockers AJ recomends them for the turbo combo i have PAC 1360 duel 1.500 springs after 50 laps last year they were only down...
