Separate names with a comma.
Just going off of our car there is one basic clutch set up. base stays the same counter weight changes very little.launch rpm stays close to the...
i run a manual shifted liberty on a turbo clutch car.we pull timing out at the 1 to 2 and 2 to 3 gear change with the grid works very well no D/S...
I will warm it up a little.with the older styles of welders you had pre heat a lot to get a good weld bead started
I have a twin turbo 529 ci 481X 12 to 1 with a mag and a single 16 volt battery.It works perfect YOU just have to have the mag crank trigger and...
I have fixed a ton of cast and billet aluminum blocks and heads.no mater what process you use the weld area will loose the original heat treat.i...
I ran a roots blown SBC cast alum heads iron block 100% filled .I ran 40 psi 11-1 comp welded all water openings on the deck of head . I ran a -12...
Get your system flowed i ran the same pump with a 387 sbc 30 to 40 psi boost had 8 .060 hat nozzles and 8 .050 port nozzles 115 pill you may be...
They are filled with potting material non reparable
would you take 3000 for the race pak
I know there are 2 EFI nozzle designs one has a beautiful atomized cone pattern the other looks like a garden hose .in back to back dyno test...
Doing the same thing with the clutch now ......locking up the clutch almost 100% in the gear changes doing all wheel speed control with the grid...
With the big cap i run 32 base timing have mag phased @ 22 and pull 30 out on 2 step no cross fire issues ditch the mag kill solenoid it can...
whatever height you end up with in front you must use a bar going thru the mains in the block to line up with the pinon C/L on the housing all...
last bryant crank i had you send them the bob weight and they contour the counter weights with no heavy metal
is it the 12 stand pedal clutch or a older fuel style think most AFT are 10'' 6 stand or 11'' 12 stand pedal clutch's then the 10.5 and 10.7...
i ran a SM5 years ago i ran a inductive pick up off the coil wire for the tach
What were you guys running for timing pro mag with 45 -50 psi boost
if its like a chevy style with horse shoe front and rear seal the 2 piece makes checking the bearings very simple.o ring seal no RTV needed The...
its not a true diamond but a CBN or Cubic Boron Nitride
Where does in the internal trigger fire the mag in relation to feeling the resistance of the magnets .Been fighting a no spark issue on the crank...
