Separate names with a comma.
clutch is locked up on 1-2 shift on a good track we can lock up the clutch in low gear in .7
I am doing this on a turbo pro mod car 3 speed in the 1/8 4 speed in the 1/4 have a good timing program for low gear. lock up the clutch 1.5 into...
do you have a new data log with the last runs
I had a 362 ci SBC -11 brodix heads 4 amp super mag 6-71 hilborn -1 pump 7.2 GPM 8 .050 hat nozzles blank pill for 1000 ft DA worked great i did...
Chris bell would be a big help on the shocks How good was the track what does your low gear timing curve look like
I would run a 4.56 remove 4 turns of base add 20 CWT 6.5 air in the tire drop 10 timing .1 into run ramp it back in @ 1.5
Pinion down 1 degree theoretically it will be straight inline on the run .What kind of shocks do you have ?Are you data logging them ? in high HP...
What kind of tire ? More pressure more traction Use the grid to limit timing for first part of the run to control wheel speed .you should be able...
I am working on an NHRA turbo pro mod team this year Brad 8 hemi We got 40 runs on a set of GRP rods this is a 10,000 rpm 1/4 mile deal One thing...
how big of motor what type (bbc hemi etc) what size blades on injector how many GPM is the pump on injected motor
I look at bottom bar angle as well
I started using .500 thick 4140 for header flanges did a set for a screw blown pro mod no cracks so far with the 5/16 thick mild steel had to weld...
With hemi motor chevy bell you will have to run the .500 thick mid plate with flat head screws for motor and special studs for bell .front motor...
They work good if your trying to dump 20 gpm of fuel lol
has anyone tried the little extra idler pulley on the blower like some of the fuel cars are doing ?
you will not be able to do all of the ext springs but most of the intakes lol just had to do it this weekend its a very nice checker !!!!!!!! wish...
How much base and counter weight are on the clutch now ? raising the launch rpms will put you in left field clutch wise if nothing gets changed
Wow...... Do you have a data logger if so how fast the the clutch lock up in low ? like will said you need to be at 5000 plus for clutch and fuel...
waterman pump has heat treated steel end plates like mike said very little wear. The 990 pump the gears ride on the anodized aluminum housing if...
I drove a nitro coupe many years ago it was on 25% they were 2 stepping before.lol it scared me i was crewing on a top fuel car at the same...
